How to carry out replacement: Track Rod End 1.4 HDi eco 70 Peugeot 206+
Disclaimer
Change Peugeot 206+ 1.4 i (2LKFWA, 2MKFWA) Track Rod End yourself – manuals and video tutorials

How to change track rod end on PEUGEOT 206+ Hatchback (2L, 2M) – replacement guide

downloads: 0
Views: 2
Download your free tutorial and fix PEUGEOT 206+ Hatchback (2L_, 2M_) 1.1 problems yourself Download for free 1.44 MB Track Rod End for Peugeot 206+ Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i, PEUGEOT 206+ Hatchback (2L_, 2M_) 1.1, PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i (2LKFWA, 2MKFWA), PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 HDi eco 70, PEUGEOT 206+ Hatchback (2L_, 2M_) 1.1 LPG … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for 206+ Hatchback (2L_, 2M_) and other PEUGEOT models
How to change Track rod end on Peugeot 206+ 1.4 HDi eco 70 – step-by-step instructions for straightforward car repair Track rod end
How to change Track rod end on 206+ Hatchback (2L, 2M) – tips for proper car maintenance
Track rod end for 206+ Hatchback (2L, 2M) Petrol (73 hp)
Simple DIY car repair steps – Replacing Track rod end on 206+ Hatchback (2L, 2M)
Track rod end for 206+ Hatchback (2L, 2M) Petrol (60 hp)
Easy tricks to help you to replace Track rod end on 206+ Hatchback (2L, 2M)
Track rod end for 206+ Hatchback (2L, 2M) Petrol (75 hp)
Track rod end removal & installation, incredibly easy steps for 206+ Hatchback (2L, 2M)
Track rod end for 206+ Hatchback (2L, 2M) Diesel (68 hp)
Changing Track rod end on 206+ Hatchback (2L, 2M) – tips for first time repair
Track rod end for 206+ Hatchback (2L, 2M) Petrol/Petroleum Gas (LPG) (60 hp)
Tools
Replacement: track rod end – PEUGEOT 206+ (T3E). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #20
Combination spanner #22
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Tap wrench
Hammer
Pin punch
Wheel chock
Buy tools
Replacement: track rod end – PEUGEOT 206+ (T3E). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – PEUGEOT 206+ (T3E) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Peugeot 206+ 2009 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 HDi eco 70 2010 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Peugeot 206+ 1.1 2011 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – PEUGEOT 206+ (T3E). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i 2012 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 206 1.6 16V 2013 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 7
    How to replace Track Rod End on PEUGEOT 206+ Hatchback (2L_, 2M_) 2009: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Peugeot 206+ 1.4 HDi eco 70 2010 - download illustrated guide
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Track Rod End on PEUGEOT 206 2011? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  9. Step 10
    Changing of Track Rod End on Peugeot 206+ 2012 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a pin punch. Use a hammer.
  10. Step 11
    PEUGEOT 206 1.4 i (2LKFWA, 2MKFWA) Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Peugeot 206+ 2009 1.4 HDi eco 70 by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    206+ Hatchback (2L_, 2M_) 1.6 16V 2010 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – PEUGEOT 206+ (T3E). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on PEUGEOT 206+ Hatchback (2L_, 2M_) 2011 - tips and tricks
    Connect the tie rod end to the steering knuckle.
  14. Step 15
    Step-by-step recommendations for DIY replacement Peugeot 206+ 2012 1.6 16V Track Rod End
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 206+ Hatchback (2L, 2M) model.

Browse tyres

Popular maintenance tutorials for Peugeot 206+

More manuals for Peugeot 206+

Complete guides for changing the Tie rod end on different PEUGEOT 206 models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 206+ Hatchback (2L_, 2M_) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 206+ Hatchback (2L_, 2M_) Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 206+ Hatchback (2L_, 2M_)
View more
  • How to change Tie rod end on PEUGEOT 206+ Hatchback (2L_, 2M_) 1.4 i (2LKFWA, 2MKFWA) - replacement tricks
    TOP 8 mistakes car owners make | AUTODOC tips
    14K views
    Published on: 09/12/2021
  • Changing Outer tie rod Peugeot 206+ 1.4 HDi eco 70 - Replacement Tips
    What to do if your car heater isn't working | AUTODOC tips
    4K views
    Published on: 11/02/2021
  • Maintenance Hacks - PEUGEOT 206+ Hatchback (2L_, 2M_) 1.1 Track rod end ball joint replacement guide
    Coolant comparison test | AUTODOC
    11K views
    Published on: 18/02/2021
  • Replace Outer tie rod end on Peugeot 206+ - free video tips
    Car checks you need to carry out on your car after the winter | AUTODOC tips
    3K views
    Published on: 23/03/2023

Most commonly replaced car parts on PEUGEOT 206

Professional manuals for the most common PEUGEOT models