Important!
This replacement procedure can be used for:
PEUGEOT 206 SW (2E/K) 1.6 Flex, PEUGEOT 206 SW (2E/K) 1.1, PEUGEOT 206 SW (2E/K) 1.4, PEUGEOT 206 SW (2E/K) 1.6 16V, PEUGEOT 206 SW (2E/K) 2.0 16V, PEUGEOT 206 SW (2E/K) 1.4 HDi, PEUGEOT 206 SW (2E/K) 2.0 HDi, PEUGEOT 206 SW (2E/K) 1.4 16V, PEUGEOT 206 SW (2E/K) 1.6 HDi 110, PEUGEOT 206 SW (2E/K) 1.6 Flex, PEUGEOT 206 SW (2E/K) 1.6, PEUGEOT 206 SW (2E/K) 1.6 LPG, PEUGEOT 206 SW (2E/K) 1.4 LPG, PEUGEOT 206 SW (2E/K) 1.4 Flex View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for 206 SW (2E/K) and other PEUGEOT models
How to change Track rod end on Peugeot 206 SW 1.4 HDi – step-by-step instructions for straightforward car repair Track rod end
How to change Rod Assembly on Peugeot 206 SW 1.4 HDi – step-by-step instructions for straightforward car repair Rod Assembly
How to change Mounting Kit, tie rod end on Peugeot 206 SW 1.4 HDi – step-by-step instructions for straightforward car repair Mounting Kit, tie rod end
Tools
Replacement: track rod end – PEUGEOT 206 SW (2E/K). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #20
Combination spanner #22
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Tap wrench
Hammer
Pin punch
Wheel chock
Replacement: track rod end – PEUGEOT 206 SW (2E/K). AUTODOC recommends:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – PEUGEOT 206 SW (2E/K) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Track Rod End on Peugeot 206 SW 2002 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 206 SW (2E/K) 1.4 HDi 2003 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Peugeot 206 SW 2.0 HDi 2004 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – PEUGEOT 206 SW (2E/K). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on PEUGEOT 206 SW (2E/K) 1.6 16V 2005 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 206 1.6 HDi 110 2006 Track Rod End - online easy-to-follow instructions
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  6. Step 7
    How to replace Track Rod End on PEUGEOT 206 SW (2E/K) 2007: download PDF manuals and video instructions
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #22.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Peugeot 206 SW 1.1 2008 - download illustrated guide
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Track Rod End on PEUGEOT 206 2009? This free workshop manual will help you to do it yourself
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  9. Step 10
    Changing of Track Rod End on Peugeot 206 SW 2010 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a pin punch. Use a hammer.
  10. Step 11
    PEUGEOT 206 1.6 Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod.
  11. Step 12
    Replacing Track Rod End on Peugeot 206 SW 2012 1.4 HDi by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    206 SW (2E/K) 1.6 HDi 110 2013 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – PEUGEOT 206 SW (2E/K). AUTODOC experts recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on PEUGEOT 206 SW (2E/K) 2014 - tips and tricks
    Connect the tie rod end to the steering knuckle.
  14. Step 15
    Step-by-step recommendations for DIY replacement Peugeot 206 SW 2015 1.6 HDi 110 Track Rod End
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 206 SW (2E/K) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 206 SW (2E/K) Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 206 SW (2E/K)
View more
  • How to change Tie rod end on PEUGEOT 206 SW (2E/K) 1.4 - replacement tricks
    How to check your head gasket | AUTODOC
  • Changing Outer tie rod Peugeot 206 SW 1.4 HDi - Replacement Tips
    How to restore a steering wheel | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 206 SW (2E/K) 2.0 HDi Track rod end ball joint replacement guide
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Replace Outer tie rod end on Peugeot 206 SW - free video tips
    How to choose the right engine oil for your car | AUTODOC