How to carry out replacement: Track Rod End 1.0 VTi PEUGEOT 108
Disclaimer
Change PEUGEOT 108 1.0 VTi Track Rod End yourself – manuals and video tutorials

How to change track rod end on PEUGEOT 108 Hatchback – replacement guide

downloads: 2
Views: 27
Download your free tutorial and fix PEUGEOT 108 1.2 problems yourself Download for free 1.53 MB Track Rod End for PEUGEOT 108 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 108 1.0 VTi, PEUGEOT 108 1.2, PEUGEOT 108 1.0 VTi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for 108 and other PEUGEOT models
Alternative products
How to change Track rod end on PEUGEOT 108 1.0 VTi – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – PEUGEOT 108. List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #17
Combination spanner #19
Drive socket # 17
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Flat Screwdriver
Nippers
Vernier caliper
Crow bar
Ball joint puller
Wheel chock
Buy tools
Replacement: track rod end – PEUGEOT 108. Tip from AUTODOC experts:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – PEUGEOT 108. Recommended sequence of steps:
  1. Step 1
    How to change Track Rod End on PEUGEOT 108 2014 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 108 1.0 VTi 2015 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    PEUGEOT 108 1.2 2016 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. PEUGEOT 108
  4. Step 5
    Changing Track Rod End on PEUGEOT 108 1.2 2017 by yourself
    Remove the wheel.
  5. Step 6
    How to remove PEUGEOT 108 1.0 VTi 2018 Track Rod End - online easy-to-follow instructions
    Remove the cotter pin fixing the tie rod end fastening. Use a crowbar. Use a flat screwdriver. Use nippers.
  6. Step 7
    How to replace Track Rod End on PEUGEOT 108 2019: download PDF manuals and video instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on PEUGEOT 108 1.0 VTi 2020 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on PEUGEOT 108 2021? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #17.
  9. Step 10
    Changing of Track Rod End on PEUGEOT 108 2022 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #17. Use a tap wrench.
  10. Step 11
    PEUGEOT 108 1.0 VTi Track Rod End replacement: online guides and video tutorials
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  11. Step 12
    Replacing Track Rod End on PEUGEOT 108 2024 1.0 VTi by yourself
    Screw the end out of the tie rod.
  12. Step 13
    108 1.0 VTi 2025 Track Rod End DIY replacement workshop manual
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Track Rod End on PEUGEOT 108 2014 - tips and tricks
    Screw on a new tie rod end.
    Replacement: track rod end – PEUGEOT 108. Professionals recommend:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  14. Step 15
    Step-by-step recommendations for DIY replacement PEUGEOT 108 2015 1.0 VTi Track Rod End
    Connect the tie rod end to the steering knuckle.
  15. Step 16
    DIY replacement of Track Rod End on PEUGEOT 108 1.0 VTi 2016 is not an issue anymore with our step-by-step tutorial
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #19. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 108 Hatchback model

PEUGEOT 108 tyre size

Popular maintenance tutorials for PEUGEOT 108

More manuals for PEUGEOT 108

Complete guides for changing the Tie rod end on different PEUGEOT 108 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 108 Track Rod End replacement - online guide
Tips & tricks for your PEUGEOT 108
View more
  • How to change Tie rod end on PEUGEOT 108 1.0 VTi - replacement tricks
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
    9K views
    Published on: 04/07/2024
  • Changing Outer tie rod PEUGEOT 108 1.0 VTi - Replacement Tips
    Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
    7K views
    Published on: 30/03/2022
  • Maintenance Hacks - PEUGEOT 108 1.2 Track rod end ball joint replacement guide
    Easy Steps to Paint Brake Calipers Without Special Skills or High Costs
    10K views
    Published on: 08/04/2021
  • Replace Outer tie rod end on PEUGEOT 108 - free video tips
    Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
    2K views
    Published on: 26/08/2021

Most commonly replaced car parts on PEUGEOT 108

Professional manuals for the most common PEUGEOT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 108 Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME