Important!
This replacement procedure can be used for:
NISSAN MICRA II (K11) 1.3 i 16V

The steps may slightly vary depending on the car design.

How to change tie rod end / track rod end on NISSAN MICRA 2 [TUTORIAL AUTODOC]

Replacement: track rod end – Nissan Micra K11. Tools you might need:
Replacement: track rod end – Nissan Micra K11. Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Drive socket # 17
Wheel impact socket #19
Ratchet wrench
Torque wrench
Vernier caliper
Ball joint puller
Wheel chock
All the parts you need to replace – Track Rod End for MICRA II (K11) and other NISSAN models
How to change Tie Rod End on Nissan Micra k11 1.0 i 16V – step-by-step instructions for straightforward car repair
Tie Rod End
How to change Tie Rod End on NISSAN MICRA II (K11) 1.3 i 16V – tips for proper car maintenance
NISSAN MICRA II (K11) 1.3 i 16V
Replacement: track rod end – Nissan Micra K11. AUTODOC experts recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • Please note: all work on the car – Nissan Micra K11 – should be done with the engine switched off.
Carry out replacement in the following order:
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN MICRA II (K11) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN MICRA II (K11) Track Rod End replacement - online guide
Tips & tricks for your NISSAN MICRA II (K11)
View more
  • How to change Tie rod end on NISSAN MICRA II (K11) 1.4 i 16V - replacement tricks
    How to remove a broken bolt without welding | AUTODOC tips
  • Changing Outer tie rod Nissan Micra k11 1.0 i 16V - Replacement Tips
    Noise from under the hood | AUTODOC TIPS
  • Maintenance Hacks - NISSAN MICRA II (K11) 1.3 i 16V Outer tie rod end replacement guide
    How to fix a knocking and creaking suspension | AUTODOC
  • Replace Track rod end ball joint on Nissan Micra k11 - free video tips
    6 SIGNS OF A BAD FUEL FILTER | AUTODOC