How to carry out replacement: Track Rod End 1.4 16V Nissan Micra k12 Convertible
Disclaimer
Change Nissan Micra k12 Convertible 1.4 16V Track Rod End yourself – manuals and video tutorials

How to change track rod end on NISSAN Micra C+C III (K12) – replacement guide

downloads: 0
Views: 23
Download your free tutorial and fix NISSAN Micra C+C III (K12) 1.6 160 SR problems yourself Download for free 1.74 MB Track Rod End for Nissan Micra k12 Convertible Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN Micra C+C III (K12) 1.6 160 SR, NISSAN Micra C+C III (K12) 1.4 16V … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Track Rod End for Micra C+C III (K12) and other NISSAN models
Alternative products
How to change Track rod end on Nissan Micra k12 Convertible 1.4 16V – step-by-step instructions for straightforward car repair Track rod end
Tools
Replacement: track rod end – NISSAN MICRA C+C (K12). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #13
Combination spanner #21
Drive socket # 16
Drive socket # 17
Wheel impact socket #17
Ratchet wrench
Tap wrench
Ball joint puller
Vernier caliper
Wheel chock
Buy tools
Replacement: track rod end – NISSAN MICRA C+C (K12). Professionals recommend:
  • Replace tie rod ends in pairs.
  • The replacement procedure is identical for the right and left tie rod ends.
  • All work should be done with the engine stopped.
Replacement: track rod end – NISSAN MICRA C+C (K12). Use the following procedure:
  1. Step 1
    How to change Track Rod End on Nissan Micra k12 Convertible 2005 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace NISSAN Micra C+C III (K12) 1.4 16V 2006 Track Rod End - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Nissan Micra k12 Convertible 1.6 160 SR 2007 Track Rod End replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: track rod end – NISSAN MICRA C+C (K12). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Track Rod End on NISSAN Micra C+C III (K12) 1.6 160 SR 2008 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN MICRA 1.4 16V 2009 Track Rod End - online easy-to-follow instructions
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Track Rod End on NISSAN Micra C+C III (K12) 2010: download PDF manuals and video instructions
    Unscrew the end fastening nut to the steering knuckle. Use a drive socket #16. Use a tap wrench.
  7. Step 8
    How hard is it to do yourself: Track Rod End replacement on Nissan Micra k12 Convertible 1.4 16V 2005 - download illustrated guide
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  8. Step 9
    Need to know how to renew Track Rod End on NISSAN MICRA 2006? This free workshop manual will help you to do it yourself
    Loosen the lock nut securing the tie rod end to the tie rod. Use a combination spanner #21 (2 pieces).
  9. Step 10
    Changing of Track Rod End on Nissan Micra k12 Convertible 2007 won't be an issue if you follow this illustrated step-by-step guide
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  10. Step 11
    NISSAN MICRA 1.4 16V Track Rod End replacement: online guides and video tutorials
    Screw the end out of the tie rod. Use a combination spanner #13.
  11. Step 12
    Replacing Track Rod End on Nissan Micra k12 Convertible 2009 1.4 16V by yourself
    Clean the mounting seats of the tie rod end. Use a wire brush. Use WD-40 spray.
  12. Step 13
    Micra C+C III (K12) 1.4 16V 2010 Track Rod End DIY replacement workshop manual
    Screw on a new tie rod end.
    Replacement: track rod end – NISSAN MICRA C+C (K12). Tip from AUTODOC:
    While installing the steering rod end remember to make the same number of turns or to leave the same length of thread showing as per your measurements.
  13. Step 14
    How to change Track Rod End on NISSAN Micra C+C III (K12) 2005 - tips and tricks
    When deinstalling, mark or measure the precise position of the ball joint on the track rod, or count the number of turns in order to prevent misalignment afterward. Use a vernier caliper.
  14. Step 15
    Step-by-step recommendations for DIY replacement Nissan Micra k12 Convertible 2006 1.4 16V Track Rod End
    Connect the tie rod end to the steering knuckle.
  15. Step 16
    DIY replacement of Track Rod End on NISSAN Micra C+C III (K12) 1.4 16V 2007 is not an issue anymore with our step-by-step tutorial
    Screw on the fastening nut that connects the tie rod end to the steering knuckle. Use a drive socket #17. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Micra C+C III (K12) model

Nissan Micra k12 Convertible tyre size

Popular maintenance tutorials for Nissan Micra k12 Convertible

More manuals for Nissan Micra k12 Convertible

Complete guides for changing the Tie rod end on different NISSAN MICRA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN Micra C+C III (K12) Track Rod End replacement - online guide
Tips & tricks for your NISSAN Micra C+C III (K12)
View more
  • How to change Tie rod end on NISSAN Micra C+C III (K12) 1.4 16V - replacement tricks
    Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
    7K views
    Published on: 26/01/2021
  • Changing Outer tie rod Nissan Micra k12 Convertible 1.4 16V - Replacement Tips
    Cold starts | 5 mistakes that wreck your car
    12K views
    Published on: 23/10/2025
  • Maintenance Hacks - NISSAN Micra C+C III (K12) 1.6 160 SR Track rod end ball joint replacement guide
    How to remove rust | AUTODOC tips
    27K views
    Published on: 16/09/2021
  • Replace Outer tie rod end on Nissan Micra k12 Convertible - free video tips
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
    4K views
    Published on: 07/04/2022

Most commonly replaced car parts on NISSAN MICRA

Professional manuals for the most common NISSAN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN Micra C+C III (K12) Track Rod End replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME