How to carry out replacement: Wheel Bearing 1.4 16V Nissan Micra k12 Convertible
Disclaimer
Change Nissan Micra k12 Convertible 1.4 16V Wheel Bearing yourself – manuals and video tutorials

How to change front wheel bearing on NISSAN Micra C+C III (K12) – replacement guide

downloads: 0
Views: 14
Download your free tutorial and fix NISSAN Micra C+C III (K12) 1.6 160 SR problems yourself Download for free 3.2 MB Wheel Bearing for Nissan Micra k12 Convertible Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN Micra C+C III (K12) 1.4 16V, NISSAN Micra C+C III (K12) 1.6 160 SR … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Micra C+C III (K12) and other NISSAN models
How to change Wheel bearing kit on Nissan Micra k12 Convertible 1.4 16V – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing kit on Micra C+C III (K12) – tips for proper car maintenance
Wheel bearing kit for Micra C+C III (K12) Petrol (88 hp)
Simple DIY car repair steps – Replacing Wheel bearing kit on Micra C+C III (K12)
Wheel bearing kit for Micra C+C III (K12) Petrol (110 hp)
Tools
Replacement: wheel bearing – NISSAN MICRA C+C (K12). Tools you'll need:
Wire brush
Nylon cleaning brush
WD-40 spray
All-purpose cleaning spray
Brake cleaner
Copper grease
Ceramic grease
Torque wrench
Combination spanner #16
Combination spanner #17
Drive socket # 14
Drive socket # 16
Drive socket # 17
Drive socket # 18
Drive socket # 30
Torx bit T40
Wheel impact socket #17
Ratchet wrench
Tap wrench
Pin punch
Impact screwdriver
Hammer
Ball joint puller
Flat chisel
Flat screwdriver
Circlip pliers
Bush and bearing driver set
Bearing separator
Wheel chock
Buy tools
Replacement: wheel bearing – NISSAN MICRA C+C (K12). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your NISSAN MICRA C+C (K12) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – NISSAN MICRA C+C (K12) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on Nissan Micra k12 Convertible 2005 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace NISSAN Micra C+C III (K12) 1.4 16V 2006 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: wheel bearing – NISSAN MICRA C+C (K12). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Nissan Micra k12 Convertible 1.6 160 SR 2007 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on NISSAN Micra C+C III (K12) 1.6 160 SR 2008 by yourself
    Clean the fastener of the driveshaft. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove NISSAN MICRA 1.4 16V 2009 Wheel Bearing - online easy-to-follow instructions
    Unscrew the fastener connecting the drive shaft to the wheel hub. Use a drive socket #30. Use a tap wrench.
  6. Step 8
    How to replace Wheel Bearing on NISSAN Micra C+C III (K12) 2010: download PDF manuals and video instructions
    Remove the fastening nut.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Nissan Micra k12 Convertible 1.4 16V 2011 - download illustrated guide
    Detach the driveshaft from the steering knuckle. Use a pin punch. Use a hammer.
  8. Step 10
    Need to know how to renew Wheel Bearing on NISSAN MICRA 2012? This free workshop manual will help you to do it yourself
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Wheel Bearing on Nissan Micra k12 Convertible 2013 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the brake caliper bracket fasteners. Use a drive socket #17. Use a ratchet wrench.
  10. Step 12
    Remove the fastening bolts.
    Step 13
    NISSAN MICRA 1.4 16V Wheel Bearing replacement: online guides and video tutorials
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – NISSAN MICRA C+C (K12). AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  11. Step 14
    Replacing Wheel Bearing on Nissan Micra k12 Convertible 2015 1.4 16V by yourself
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  12. Step 15
    Micra C+C III (K12) 1.4 16V 2016 Wheel Bearing DIY replacement workshop manual
    Unscrew the brake disc fasteners. Use Torx T40. Use an impact screwdriver.
  13. Step 16
    Remove the fastening bolts.
    Step 17
    How to change Wheel Bearing on NISSAN Micra C+C III (K12) 2017 - tips and tricks
    Remove the brake disc.
  14. Step 18
    Step-by-step recommendations for DIY replacement Nissan Micra k12 Convertible 2018 1.4 16V Wheel Bearing
    Clean the ABS sensor fastener. Use a nylon cleaning brush. Use all-purpose cleaning spray.
  15. Step 19
    DIY replacement of Wheel Bearing on NISSAN Micra C+C III (K12) 1.4 16V 2019 is not an issue anymore with our step-by-step tutorial
    Disconnect the ABS sensor.
  16. Step 20
    How to change Wheel Bearing on Nissan Micra k12 Convertible 2005 - free PDF and video manuals
    Clean the fastener connecting the tie rod end to the steering knuckle. Use a wire brush. Use WD-40 spray.
  17. Step 21
    How to replace NISSAN Micra C+C III (K12) 1.4 16V 2006 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the fastening nut connecting the tie rod end to the steering knuckle. Use a drive socket #14. Use a ratchet wrench.
  18. Step 22
    Nissan Micra k12 Convertible 1.6 160 SR 2007 Wheel Bearing replacement: free workshop manuals
    Disconnect the tie rod end from the steering knuckle. Use a ball joint puller.
  19. Step 23
    Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 24
    Changing Wheel Bearing on NISSAN Micra C+C III (K12) 1.6 160 SR 2008 by yourself
    Unscrew the fastener that connects the ball joint of the lower arm to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  20. Step 25
    How to remove NISSAN MICRA 1.4 16V 2009 Wheel Bearing - online easy-to-follow instructions
    Remove the fastening bolt.
  21. Step 26
    Clean the fasteners connecting the shock strut to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 27
    How to replace Wheel Bearing on NISSAN Micra C+C III (K12) 2010: download PDF manuals and video instructions
    Unscrew the lower suspension strut fasteners. Use a combination spanner #17. Use a drive socket #18. Use a ratchet wrench.
  22. Step 28
    Remove the fastening bolts.
    Step 29
    How hard is it to do yourself: Wheel Bearing replacement on Nissan Micra k12 Convertible 1.4 16V 2011 - download illustrated guide
    Release the fastener connecting the ball joint to the steering knuckle. Use a flat metal-working chisel. Use a hammer.
  23. Step 30
    Need to know how to renew Wheel Bearing on NISSAN MICRA 2012? This free workshop manual will help you to do it yourself
    Disconnect the ball joint from the steering knuckle.
  24. Step 31
    Changing of Wheel Bearing on Nissan Micra k12 Convertible 2013 won't be an issue if you follow this illustrated step-by-step guide
    Pull the CV axle out of the steering knuckle, lift it up, and tie it to the body.
  25. Step 32
    NISSAN MICRA 1.4 16V Wheel Bearing replacement: online guides and video tutorials
    Disconnect the steering knuckle from the suspension strut.
  26. Step 33
    Replacing Wheel Bearing on Nissan Micra k12 Convertible 2015 1.4 16V by yourself
    Remove the steering knuckle together with the wheel hub.
  27. Step 34
    Micra C+C III (K12) 1.4 16V 2016 Wheel Bearing DIY replacement workshop manual
    Remove the wheel hub from the steering knuckle. Use a bush and bearing driver set.
  28. Step 35
    How to change Wheel Bearing on NISSAN Micra C+C III (K12) 2017 - tips and tricks
    Clean the wheel hub bearing retaining ring. Use a wire brush. Use WD-40 spray.
  29. Step 36
    Step-by-step recommendations for DIY replacement Nissan Micra k12 Convertible 2018 1.4 16V Wheel Bearing
    Remove the wheel hub bearing retaining ring. Use a flat screwdriver.
  30. Step 37
    DIY replacement of Wheel Bearing on NISSAN Micra C+C III (K12) 1.4 16V 2019 is not an issue anymore with our step-by-step tutorial
    Dismantle the inner bearing race that is remaining on the hub. Use a bush and bearing driver set. Use a bearing separator.
  31. Step 38
    How to change Wheel Bearing on Nissan Micra k12 Convertible 2005 - free PDF and video manuals
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  32. Step 39
    How to replace NISSAN Micra C+C III (K12) 1.4 16V 2006 Wheel Bearing - step-by-step manuals and video guides
    Clean the hub bearing mounting seat. Use a wire brush.
  33. Step 40
    Nissan Micra k12 Convertible 1.6 160 SR 2007 Wheel Bearing replacement: free workshop manuals
    Install a new ABS sensor mounting ring.
  34. Step 41
    Changing Wheel Bearing on NISSAN Micra C+C III (K12) 1.6 160 SR 2008 by yourself
    Press-fit the new bearing into the steering knuckle. Use a bush and bearing driver set.
    AUTODOC recommends:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment.
  35. Step 42
    How to remove NISSAN MICRA 1.4 16V 2009 Wheel Bearing - online easy-to-follow instructions
    Install the wheel hub bearing retaining ring. Use circlip pliers.
  36. Step 43
    How to replace Wheel Bearing on NISSAN Micra C+C III (K12) 2010: download PDF manuals and video instructions
    Install the wheel hub on the steering knuckle. Use a bush and bearing driver set.
    Replacement: wheel bearing – NISSAN MICRA C+C (K12). AUTODOC experts recommend:
    Make sure that the wheel hub is positioned correctly. Avoid any misalignment.
  37. Step 44
    How hard is it to do yourself: Wheel Bearing replacement on Nissan Micra k12 Convertible 1.4 16V 2011 - download illustrated guide
    Clean the steering knuckle mounting seats. Use a wire brush. Use all-purpose cleaning spray.
  38. Step 45
    Need to know how to renew Wheel Bearing on NISSAN MICRA 2012? This free workshop manual will help you to do it yourself
    Clean the tie rod end fastener. Use a wire brush. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Micra C+C III (K12) model.

Browse tyres

Popular maintenance tutorials for Nissan Micra k12 Convertible

More manuals for Nissan Micra k12 Convertible

Complete guides for changing the Wheel bearings on different NISSAN MICRA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN Micra C+C III (K12) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN Micra C+C III (K12) Wheel Bearing replacement - online guide
Tips & tricks for your NISSAN Micra C+C III (K12)
View more
  • How to change Wheel bearings on NISSAN Micra C+C III (K12) 1.4 16V - replacement tricks
    Top 5 mistakes when working in the engine bay | AUTODOC tips
    7K views
    Published on: 04/08/2023
  • Changing Hub bearing Nissan Micra k12 Convertible 1.4 16V - Replacement Tips
    How to reduce fuel consumption | AUTODOC
    4K views
    Published on: 27/09/2022
  • Maintenance Hacks - NISSAN Micra C+C III (K12) 1.6 160 SR Wheel bearing kit replacement guide
    How and why to check your oil | AUTODOC tips
    5K views
    Published on: 23/02/2023
  • Replace Wheel hub bearing on Nissan Micra k12 Convertible - free video tips
    How to restore a steering wheel | AUTODOC tips
    32K views
    Published on: 17/02/2022

Most commonly replaced car parts on NISSAN MICRA

Professional manuals for the most common NISSAN models