How to carry out replacement: Wheel Bearing 1.4 16V Nissan Micra k12 Convertible
Disclaimer
Change Nissan Micra k12 Convertible 1.4 16V Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on NISSAN Micra C+C III (K12) – replacement guide

downloads: 0
Views: 65
Download your free tutorial and fix NISSAN Micra C+C III (K12) 1.6 160 SR problems yourself Download for free 1.5 MB Wheel Bearing for Nissan Micra k12 Convertible Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
NISSAN Micra C+C III (K12) 1.4 16V, NISSAN Micra C+C III (K12) 1.6 160 SR … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Micra C+C III (K12) and other NISSAN models
How to change Wheel bearing kit on Nissan Micra k12 Convertible 1.4 16V – step-by-step instructions for straightforward car repair Wheel bearing kit
How to change Wheel bearing kit on Micra C+C III (K12) – tips for proper car maintenance
Wheel bearing kit for Micra C+C III (K12) Petrol (88 hp)
Simple DIY car repair steps – Replacing Wheel bearing kit on Micra C+C III (K12)
Wheel bearing kit for Micra C+C III (K12) Petrol (110 hp)
Tools
Replacement: wheel bearing – NISSAN MICRA C+C (K12). Tools you'll need:
WD-40 spray
All-purpose cleaning spray
Multipurpose grease
Copper grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Tap wrench
Hammer
Rubber mallet
Bush and bearing driver set
Circlip pliers
Crow bar
Wheel chock
Buy tools
Replacement: wheel bearing – NISSAN MICRA C+C (K12). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your NISSAN MICRA C+C (K12) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – NISSAN MICRA C+C (K12). Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on Nissan Micra k12 Convertible 2005 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace NISSAN Micra C+C III (K12) 1.4 16V 2006 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: wheel bearing – NISSAN MICRA C+C (K12). Professionals recommend:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Nissan Micra k12 Convertible 1.6 160 SR 2007 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on NISSAN Micra C+C III (K12) 1.6 160 SR 2008 by yourself
    Remove the hub bearing protection cap. Use a hammer. Use a crowbar.
    Replacement: wheel bearing – NISSAN MICRA C+C (K12). Tip:
    Some cars are not equipped with wheel hub caps.
  5. Step 7
    Clean the wheel hub fastener. Use WD-40 spray.
    Step 8
    How to remove NISSAN MICRA 1.4 16V 2009 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench.
  6. Step 9
    How to replace Wheel Bearing on NISSAN Micra C+C III (K12) 2010: download PDF manuals and video instructions
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – NISSAN MICRA C+C (K12). AUTODOC experts recommend:
    Examine the brake drum. Replace it if necessary.
  7. Step 10
    How hard is it to do yourself: Wheel Bearing replacement on Nissan Micra k12 Convertible 1.4 16V 2011 - download illustrated guide
    Clean the fasteners of the wheel hub bearing.
  8. Step 11
    Need to know how to renew Wheel Bearing on NISSAN MICRA 2012? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  9. Step 12
    Changing of Wheel Bearing on Nissan Micra k12 Convertible 2013 won't be an issue if you follow this illustrated step-by-step guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  10. Step 13
    NISSAN MICRA 1.4 16V Wheel Bearing replacement: online guides and video tutorials
    Clean the hub bearing mounting seat. Use WD-40 spray.
  11. Step 14
    Replacing Wheel Bearing on Nissan Micra k12 Convertible 2015 1.4 16V by yourself
    Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.
    Replacement: wheel bearing – NISSAN MICRA C+C (K12). Tip from AUTODOC experts:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment. Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  12. Step 15
    Micra C+C III (K12) 1.4 16V 2016 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Micra C+C III (K12) model.

Browse tyres

Popular maintenance tutorials for Nissan Micra k12 Convertible

More manuals for Nissan Micra k12 Convertible

Complete guides for changing the Wheel bearings on different NISSAN MICRA models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN Micra C+C III (K12) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN Micra C+C III (K12) Wheel Bearing replacement - online guide
Tips & tricks for your NISSAN Micra C+C III (K12)
View more
  • How to change Wheel bearings on NISSAN Micra C+C III (K12) 1.4 16V - replacement tricks
    How to remove scratches from a car | AUTODOC tips
    7K views
    Published on: 12/05/2022
  • Changing Hub bearing Nissan Micra k12 Convertible 1.4 16V - Replacement Tips
    TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
    8K views
    Published on: 15/06/2023
  • Maintenance Hacks - NISSAN Micra C+C III (K12) 1.6 160 SR Wheel bearing kit replacement guide
    TOP 6 WD-40 lifehacks | AUTODOC tips
    12K views
    Published on: 15/07/2021
  • Replace Wheel hub bearing on Nissan Micra k12 Convertible - free video tips
    DIY brake caliper restoration | AUTODOC tips
    557K views
    Published on: 02/06/2022

Most commonly replaced car parts on NISSAN MICRA

Professional manuals for the most common NISSAN models