Disclaimer
How to change spark plugs on TOYOTA Solara Coupe (_V3_) – replacement guide
downloads:
8
Views:
201
Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
TOYOTA Solara Coupe (_V3_) 2.4 (ACV30_) … View more
The steps may slightly vary depending on the car design.
TOYOTA Solara Coupe (_V3_) 2.4 (ACV30_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Solara Coupe (_V3_) and other TOYOTA models
Alternative products

WD-40 spray
High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 14
Spark plug socket # 16
Ratchet wrench
Torque wrench
Clip removal tool
Fender cover
Replacement: spark plugs – TOYOTA CAMRY SOLARA Coupe (MCV3_, ACV3_). Tip from AUTODOC experts:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – TOYOTA CAMRY SOLARA Coupe (MCV3_, ACV3_). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the fasteners of the windscreen wiper arms. Use a drive socket #14. Use a ratchet wrench. - Step 4
Remove the wiper arms. - Step 5
Remove the wiper arm covers. Use a clip removal tool. - Step 6
Treat the fasteners of the windscreen wiper linkage. Use WD-40 spray. - Step 7
Detach the windscreen wiper connector. - Step 8
Unscrew the fasteners of the windscreen wiper linkage panel. Use a drive socket #10. Use a ratchet wrench. - Step 9
Unscrew the fasteners of the fuse box. Use a drive socket #10. Use a ratchet wrench. - Step 10
Remove the panel assembled with the windscreen wiper linkage. - Step 11
Clean the ignition coils. - Step 12
Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench. - Step 13
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – TOYOTA CAMRY SOLARA Coupe (MCV3_, ACV3_). AUTODOC recommends:Remember the sequence of steps for ignition coil demounting. - Step 14
Clean dirt, dust and debris from inside the spark plug wells. - Step 15
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 16
Take out the spark plugs. - Step 17
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 18
Install the new spark plugs into their mounting seats. Use the spark plug socket #16. - Step 19
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 18 nm torque.Replacement: spark plugs – TOYOTA CAMRY SOLARA Coupe (MCV3_, ACV3_). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Solara II Coupe (XV30) model
Popular maintenance tutorials for Solara V30
Complete guides for changing the Engine spark plug on different TOYOTA SOLARA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Solara Coupe (_V3_)
View more
5 signs of a faulty strut mount and how to fix it
Top 5 reasons why your car squeals | AUTODOC Tips
CHECK ENGINE light turned on – step-by-step guide on what to do
#DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
Most commonly replaced car parts on TOYOTA SOLARA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























