When to replace the Spark Plug on your TOYOTA IQ
Recommended replacement interval for the part category Spark plug : 90000 km
Important!
This replacement procedure can be used for:
TOYOTA iQ (_J1_) 1.33 (NGJ10_) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Spark Plug for iQ (_J1_) and other TOYOTA models
Tools
Replacement: spark plugs – TOYOTA IQ (KPJ1_, NGJ1_, KGJ1_, NUJ1_). Tools you'll need:
Electronic spray
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – TOYOTA IQ (KPJ1_, NGJ1_, KGJ1_, NUJ1_). Professionals recommend:
  • The replacement procedure is the same for all spark plugs.
  • Please note: all work on the car – TOYOTA IQ (KPJ1_, NGJ1_, KGJ1_, NUJ1_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Spark Plug on Toyota IQ AJ1 2008 - free PDF and video manuals
    Remove the engine cover.
  2. Step 4
    How to replace TOYOTA iQ (_J1_) 1.0 (KGJ10_) 2009 Spark Plug - step-by-step manuals and video guides
    Unplug the connectors from the ignition coils.
  3. Step 5
    Toyota IQ AJ1 1.4 D-4D (NUJ10_) 2010 Spark Plug replacement: free workshop manuals
    Clean the ignition coils.
  4. Step 6
    Changing Spark Plug on TOYOTA iQ (_J1_) EV (KPJ10) 2011 by yourself
    Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
  5. Step 7
    How to remove TOYOTA IQ 1.0 (KGJ10_) 2012 Spark Plug - online easy-to-follow instructions
    Take out the ignition coils from the spark plug wells.
    Replacement: spark plugs – TOYOTA IQ (KPJ1_, NGJ1_, KGJ1_, NUJ1_). AUTODOC recommends:
    Remember the sequence of steps for ignition coil demounting.
  6. Step 8
    Clean dirt, dust and debris from inside the spark plug wells.
    Step 9
    How to replace Spark Plug on TOYOTA iQ (_J1_) 2013: download PDF manuals and video instructions
    Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
  7. Step 10
    How hard is it to do yourself: Spark Plug replacement on Toyota IQ AJ1 1.33 (NGJ10_) 2014 - download illustrated guide
    Take out the spark plugs.
  8. Step 11
    Need to know how to renew Spark Plug on TOYOTA IQ 2015? This free workshop manual will help you to do it yourself
    Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
  9. Step 12
    Changing of Spark Plug on Toyota IQ AJ1 2008 won't be an issue if you follow this illustrated step-by-step guide
    Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
  10. Step 13
    TOYOTA IQ 1.0 (KGJ10_) Spark Plug replacement: online guides and video tutorials
    Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 20 nm torque.
    Replacement: spark plugs – TOYOTA IQ (KPJ1_, NGJ1_, KGJ1_, NUJ1_). AUTODOC experts recommend:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA iQ (AJ10) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
TOYOTA iQ (_J1_) Spark Plug replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY TOYOTA iQ (_J1_) Spark Plug replacement - online guide
Tips & tricks for your TOYOTA iQ (_J1_)
View more
  • How to change Engine spark plug on TOYOTA iQ (_J1_) 1.33 (NGJ10_) - replacement tricks
    DIY starter repair | AUTODOC tips
  • Changing Spark plug Toyota IQ AJ1 1.0 (KGJ10_) - Replacement Tips
    Headlight Restoration | AUTODOC tips
  • Maintenance Hacks - TOYOTA iQ (_J1_) 1.4 D-4D (NUJ10_) Engine spark plugs replacement guide
    5 mistakes made when washing the engine | AUTODOC tips
  • Replace Spark plug set on Toyota IQ AJ1 - free video tips
    Replacing your engine cooling fan | AUTODOC tips