How to carry out replacement: Spark Plug 2.4 4WD (ACU35_) TOYOTA Harrier II (XU30)
Disclaimer
Change TOYOTA Harrier II (XU30) 2.4 4WD (ACU35_) Spark Plug yourself – manuals and video tutorials

How to change spark plugs on TOYOTA Harrier II (XU30) – replacement guide

downloads: 25
Views: 280
Download your free tutorial and fix TOYOTA Harrier II (XU30) 3.0 4WD (MCU36W, MCU35) problems yourself Download for free 1.68 MB Spark Plug for TOYOTA Harrier II (XU30) Shop now
Leave a comment Open in a new tab
When to replace the Spark Plug on your TOYOTA HARRIER
Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
TOYOTA Harrier II (XU30) 2.4 4WD (ACU35_) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Spark Plug for Harrier II (XU30) and other TOYOTA models
Alternative products
How to change Spark plug on TOYOTA Harrier II (XU30) 2.4 4WD (ACU35_) – step-by-step instructions for straightforward car repair Spark plug
Tools
Replacement: spark plugs – TOYOTA Harrier II (XU30). List of the tools you'll need:
WD-40 spray
High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 14
Spark plug socket # 16
Ratchet wrench
Torque wrench
Clip removal tool
Fender cover
Buy tools
Replacement: spark plugs – TOYOTA Harrier II (XU30). Tip from AUTODOC experts:
  • The replacement procedure is the same for all spark plugs.
  • All work should be done with the engine stopped.
Replacement: spark plugs – TOYOTA Harrier II (XU30). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Spark Plug on TOYOTA Harrier II (XU30) 2003 - free PDF and video manuals
    Unscrew the fasteners of the windscreen wiper arms. Use a drive socket #14. Use a ratchet wrench.
  2. Step 4
    How to replace TOYOTA Harrier II (XU30) 2.4 4WD (ACU35_) 2004 Spark Plug - step-by-step manuals and video guides
    Remove the wiper arms.
  3. Step 5
    TOYOTA Harrier II (XU30) 3.3 Hybrid 4WD (MHU38_) 2005 Spark Plug replacement: free workshop manuals
    Remove the wiper arm covers. Use a clip removal tool.
  4. Step 6
    Changing Spark Plug on TOYOTA Harrier II (XU30) 3.3 4WD 2006 by yourself
    Treat the fasteners of the windscreen wiper linkage. Use WD-40 spray.
  5. Step 7
    How to remove TOYOTA HARRIER 3.5 4WD (GSU35_, GSU36_) 2007 Spark Plug - online easy-to-follow instructions
    Detach the windscreen wiper connector.
  6. Step 8
    How to replace Spark Plug on TOYOTA Harrier II (XU30) 2008: download PDF manuals and video instructions
    Unscrew the fasteners of the windscreen wiper linkage panel. Use a drive socket #10. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Spark Plug replacement on TOYOTA Harrier II (XU30) 3.0 (MCU30) 2009 - download illustrated guide
    Unscrew the fasteners of the fuse box. Use a drive socket #10. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Spark Plug on TOYOTA HARRIER 2010? This free workshop manual will help you to do it yourself
    Remove the panel assembled with the windscreen wiper linkage.
  9. Step 11
    Changing of Spark Plug on TOYOTA Harrier II (XU30) 2011 won't be an issue if you follow this illustrated step-by-step guide
    Clean the ignition coils.
  10. Step 12
    TOYOTA HARRIER 2.4 4WD (ACU35_) Spark Plug replacement: online guides and video tutorials
    Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench.
  11. Step 13
    Replacing Spark Plug on TOYOTA Harrier II (XU30) 2013 2.4 4WD (ACU35_) by yourself
    Take out the ignition coils from the spark plug wells.
    Replacement: spark plugs – TOYOTA Harrier II (XU30). AUTODOC recommends:
    Remember the sequence of steps for ignition coil demounting.
  12. Step 14
    Harrier II (XU30) 3.5 4WD (GSU35_, GSU36_) 2003 Spark Plug DIY replacement workshop manual
    Clean dirt, dust and debris from inside the spark plug wells.
  13. Step 15
    How to change Spark Plug on TOYOTA Harrier II (XU30) 2004 - tips and tricks
    Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
  14. Step 16
    Step-by-step recommendations for DIY replacement TOYOTA Harrier II (XU30) 2005 3.5 4WD (GSU35_, GSU36_) Spark Plug
    Take out the spark plugs.
  15. Step 17
    DIY replacement of Spark Plug on TOYOTA Harrier II (XU30) 3.0 4WD (MCU35_, MCU36_) 2006 is not an issue anymore with our step-by-step tutorial
    Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
  16. Step 18
    How to change Spark Plug on TOYOTA Harrier II (XU30) 2003 - free PDF and video manuals
    Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
  17. Step 19
    How to replace TOYOTA Harrier II (XU30) 2.4 4WD (ACU35_) 2004 Spark Plug - step-by-step manuals and video guides
    Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 18 nm torque.
    Replacement: spark plugs – TOYOTA Harrier II (XU30). Professionals recommend:
    Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Harrier II (XU30) model

TOYOTA Harrier II (XU30) tyre size

Popular maintenance tutorials for TOYOTA Harrier II (XU30)

More manuals for TOYOTA Harrier II (XU30)

Complete guides for changing the Engine spark plug on different TOYOTA HARRIER models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY TOYOTA Harrier II (XU30) Spark Plug replacement - online guide
Tips & tricks for your TOYOTA Harrier II (XU30)
View more
  • How to change Engine spark plug on TOYOTA Harrier II (XU30) 3.0 4WD (MCU35_, MCU36_) - replacement tricks
    Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
    7K views
    Published on: 19/01/2021
  • Changing Spark plug TOYOTA Harrier II (XU30) 2.4 4WD (ACU35_) - Replacement Tips
    How to tighten cylinder head bolts
    7K views
    Published on: 06/03/2025
  • Maintenance Hacks - TOYOTA Harrier II (XU30) 3.3 Hybrid 4WD (MHU38_) Engine spark plugs replacement guide
    #TPMS Explained: Why Your Light is On and How to Respond Safely
    8K views
    Published on: 28/09/2023
  • Replace Spark plug set on TOYOTA Harrier II (XU30) - free video tips
    Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
    9K views
    Published on: 13/01/2021

Most commonly replaced car parts on TOYOTA HARRIER

Professional manuals for the most common TOYOTA models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
TOYOTA Harrier II (XU30) Spark Plug replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME