Disclaimer
How to change spark plugs on TOYOTA Corona VIII Saloon (T170) – replacement guide
downloads:
2
Views:
18
Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
TOYOTA Corona VIII Saloon (T170) 1.8 (ST180_, ST181_) … View more
The steps may slightly vary depending on the car design.
TOYOTA Corona VIII Saloon (T170) 1.8 (ST180_, ST181_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Corona VIII Saloon (T170) and other TOYOTA models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Flat Screwdriver
Fender cover
Replacement: spark plugs – TOYOTA Corona VIII Limousine (T170). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – TOYOTA Corona VIII Limousine (T170). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the engine cover fastener. Use a drive socket #10. Use a ratchet wrench. - Step 4
Remove the engine cover. - Step 5
Unplug the connectors from the ignition coils. Use a flat screwdriver. - Step 6
Unscrew the fasteners of the ignition coils. Use a drive socket #10. Use a ratchet wrench. - Step 7
Take out the ignition coils from the spark plug wells. - Step 8Clean dirt, dust and debris from inside the spark plug wells.Step 9
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 10
Take out the spark plugs. Use the spark plug socket #16. - Step 11
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 12
Install the new spark plugs into their mounting seats. - Step 13
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 22 nm torque.Replacement: spark plugs – TOYOTA Corona VIII Limousine (T170). AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Corona VIII Saloon (T170) model
Popular maintenance tutorials for TOYOTA Corona VIII Limousine (T170)
Complete guides for changing the Engine spark plug on different TOYOTA CORONA models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Corona VIII Saloon (T170)
View more
How to remove rust | AUTODOC tips
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
K2 ROTON wheel cleaner overview
Prevent Engine Damage: How to Identify Rocker Cover Gasket Issues and Proper Replacement | AUTODOC
Most commonly replaced car parts on TOYOTA CORONA
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























