
Disclaimer
How to change spark plugs on FIAT Stilo Box Body / Estate (192) – replacement guide
downloads:
2
Views:
11

Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
FIAT Stilo Box Body / Estate (192) 1.6 (192DXR1A) … View more
The steps may slightly vary depending on the car design.
FIAT Stilo Box Body / Estate (192) 1.6 (192DXR1A) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Stilo Box Body / Estate (192) and other FIAT models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 16
Spark plug socket # 16
Ratchet wrench
Torque wrench
Crow bar
Flat Screwdriver
Microfibre towel
Fender cover
Replacement: spark plugs – FIAT Stilo Kasten / Kombi (192). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – FIAT Stilo Kasten / Kombi (192). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the filter housing fastening bolts. Use a drive socket #10. Use a ratchet wrench.
- Step 4Remove the air filter housing retaining spring.
- Step 5Remove the air filter housing.
- Step 6Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 7Detach the crankcase ventilation hose from the engine cover at the left. Use a crowbar.
- Step 8Detach the throttle valve connectors. Use a crowbar.
- Step 9Remove the spark plug wire connectors from the spark plug wells.Replacement: spark plugs – FIAT Stilo Kasten / Kombi (192). AUTODOC recommends:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors.
- Step 10Clean dirt, dust and debris from inside the spark plug wells.
- Step 11Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 12Take out the spark plugs. Use the spark plug socket #16.
- Step 13Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 14Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
- Step 15Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 27 nm torque.Replacement: spark plugs – FIAT Stilo Kasten / Kombi (192). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
- Step 16Treat the spark plug wire connectors. Use high-temperature grease. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Stilo Box Body / Estate (192) model
Popular maintenance tutorials for FIAT Stilo Kasten / Kombi (192)
Complete guides for changing the Engine spark plug on different FIAT STILO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT Stilo Box Body / Estate (192)
View more
- How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
- Transform Your Car's Look: 6 Simple Accessories You Need to Try!
- Top 5 mistakes when replacing spark plugs | AUTODOC tips
- DIY alternator repair | AUTODOC tips
Most commonly replaced car parts on FIAT STILO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME