Important!

This replacement procedure can be used for:
FIAT Stilo Box Body / Estate (192) 1.9 JTD (192DXT1B), FIAT Stilo Box Body / Estate (192) 1.6 (192DXR1A), FIAT Stilo Box Body / Estate (192) 1.9 JTD (192DXS1A), FIAT Stilo Box Body / Estate (192) 1.6 (192DXB1A), FIAT Stilo Box Body / Estate (192) 1.9 JTD (192DXG1B), FIAT Stilo Box Body / Estate (192) 1.4 (192DXH1B), FIAT Stilo Box Body / Estate (192) 1.9 JTD (192DXG1B), FIAT Stilo Box Body / Estate (192) 1.9 JTD (192DXG1B), FIAT Stilo Box Body / Estate (192) 1.9 JTD (192DXF1A), FIAT Stilo Box Body / Estate (192) 1.9 JTD (192DXE1A) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for Stilo Box Body / Estate (192) and other FIAT models

Anti-roll bar link

        Anti-roll bar link for Stilo Box Body / Estate (192) Diesel (116 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Diesel (80 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Diesel (126 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Diesel (140 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Petrol (95 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Diesel (136 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Petrol (136 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Diesel (120 hp)
      
        Anti-roll bar link for Stilo Box Body / Estate (192) Petrol (105 hp)

Replacement: anti roll bar links – FIAT Stilo Kasten / Kombi (192). Tools you might need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Copper grease 
                      
                        HEX bit No.H5
                      
                        Combination spanner #17
                      
                        Drive socket # 10 
                      
                        Drive socket # 17 
                      
                        Wheel impact socket #17
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Phillips Screwdriver
                      
                        Hydraulic transmission jack
                      
                        Wheel chock

Buy tools

AUTODOC recommends:

Replace the stabiliser links on FIAT Stilo Kasten / Kombi (192) in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – FIAT Stilo Kasten / Kombi (192). Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts. Use wheel impact socket #17.
Step 3

Raise the front of the car and secure on supports.

Step 4

Unscrew the wheel bolts.

AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT Stilo Kasten / Kombi (192)
Step 5

Remove the wheel.
Step 6

Chock the opposite wheel. Use a hydraulic transmission jack.
Step 7

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #17. Use a ratchet wrench.
Step 9

Unscrew and remove the wheel arch cover fasteners. Use a drive socket #10. Use a ratchet wrench. Use a Phillips screwdriver.
Step 10

Remove the wheel arch cover.
Step 11

Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 12

Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use HEX No.H5. Use a combination spanner #17. Use a ratchet wrench.
Step 13

Remove the stabilizer rod.

Replacement: anti roll bar links – FIAT Stilo Kasten / Kombi (192). Professionals recommend:
Examine stabiliser bushes. Replace them if needed.
Step 14

Install a new rod, tighten the fasteners.
Step 15

Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use HEX No.H5. Use a torque wrench. Tighten it to 55 Nm torque.
Step 16

Remove the hydraulic transmission jack.

Replacement: anti roll bar links – FIAT Stilo Kasten / Kombi (192). Tip from AUTODOC experts:
Lower the hydraulic transmission jack smoothly, without jerks, to avoid damaging assemblies and mechanisms.
Step 17

Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #17. Use HEX No.H5. Use a torque wrench. Tighten it to 55 Nm torque.
Step 18

Install the wheel arch cover to its mounting seat.
Step 19

Install and tighten the wheel arch cover fasteners. Use a drive socket #10. Use a ratchet wrench. Use a Phillips screwdriver.
Step 20

Clean the wheel rim mounting seat. Use a wire brush. Treat the contacting surface. Use copper grease.

Step 21

Install the wheel.

AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. FIAT Stilo Kasten / Kombi (192)
Step 22

Screw in the wheel bolts. Use wheel impact socket #17.
Step 23

Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #17. Use a torque wrench. Tighten it to 120 Nm torque.
Step 24

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Stilo Box Body / Estate (192) model.

Browse tyres

How to change front strut mount on FIAT Stilo Box Body / Estate (192) – replacement guide

Free download PDF
3.05 MB
How to change front lower arm on FIAT Stilo Box Body / Estate (192) – replacement guide

Free download PDF
2.49 MB
How to change front brake pads on FIAT Stilo Box Body / Estate (192) – replacement guide

Free download PDF
1.61 MB
How to change front brake discs on FIAT Stilo Box Body / Estate (192) – replacement guide

Free download PDF
2.29 MB
How to change rear brake discs on FIAT Stilo Box Body / Estate (192) – replacement guide

Free download PDF
2.18 MB
How to change spark plugs on FIAT Stilo Box Body / Estate (192) – replacement guide

Free download PDF
1.46 MB

How to change front anti roll bar links on FIAT STILO (192) – replacement guide

Free download PDF
1.7 MB
How to change front anti roll bar links on FIAT STILO Multi Wagon (192) – replacement guide

Free download PDF
1.7 MB
How to change anti roll bar links on a car – replacement tutorial

Universal

Free download PDF
972.8 KB
How to change front anti roll bar links on Fiat Punto 188 – replacement guide

Free download PDF
1.31 MB
How to change front anti roll bar links on Fiat Panda 169 – replacement guide

Free download PDF
1.28 MB
How to change front anti roll bar links on Fiat Punto 199 – replacement guide

Free download PDF
1.37 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

5 Tips for New Drivers | AUTODOC tips

3K views

Published on: 31/01/2023
5 most common causes of oil leaks | AUTODOC tips

15K views

Published on: 30/03/2023
How to check your head gasket | AUTODOC

4K views

Published on: 03/12/2020
How and why to check your oil | AUTODOC tips

5K views

Published on: 23/02/2023