
Disclaimer
How to change spark plugs on AUDI TT Roadster (8N9) – replacement guide
downloads:
3
Views:
83

Recommended replacement interval for the part category Spark plug : 6 year / 60000 km
Important!
This replacement procedure can be used for:
AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T … View more
The steps may slightly vary depending on the car design.
AUDI TT Roadster (8N9) 1.8 T quattro, AUDI TT Roadster (8N9) 1.8 T … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for TT Roadster (8N9) and other AUDI models
Spark plug
Alternative products

Torque wrench
Spark plug socket # 16
High-temperature anti-seize lubricant
Fender cover
Replacement: spark plugs – AUDI TT Roadster (8N9). AUTODOC experts recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – AUDI TT Roadster (8N9). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Release the throttle cable from its fasteners on the engine cover.
- Step 4Remove the spark plug wire connectors from the spark plug wells.Replacement: spark plugs – AUDI TT Roadster (8N9). Tip from AUTODOC:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors.
- Step 5Clean dirt, dust and debris from inside the spark plug wells.
- Step 6Unscrew the spark plugs. Use the spark plug socket #16.Please note!To insert the spark plug wrench into the spark plug well of the cylinder #3, unplug the connector on the engine intake manifold.
- Step 7Take out the spark plugs.
- Step 8Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 9Install the new spark plugs into their mounting seats.
- Step 10Screw new spark plugs and tighten them. Use a torque wrench. Use the spark plug socket #16. Tighten it to 25 nm torque.Replacement: spark plugs – AUDI TT Roadster (8N9). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI TT Roadster (8N9) model
Popular maintenance tutorials for Audi TT 8N Roadster
Complete guides for changing the Engine spark plug on different AUDI TT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI TT Roadster (8N9)
View more
- Save Money on Fuel with These Easy Tips | AUTODOC
- Top 5 car noises you shouldn't ignore
- How do EGR valves work? | AUTODOC
- How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
Most commonly replaced car parts on AUDI TT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME