Disclaimer
How to change spark plugs on AUDI TT Coupe (8N3) – replacement guide
downloads:
2
Views:
115
Recommended replacement interval for the part category Spark plug : 6 year / 60000 km
Important!
This replacement procedure can be used for:
AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T … View more
The steps may slightly vary depending on the car design.
AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for TT Coupe (8N3) and other AUDI models
Alternative products

Torque wrench
Spark plug socket # 16
High-temperature anti-seize lubricant
Fender cover
Replacement: spark plugs – AUDI TT (8N3). AUTODOC experts recommend:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – AUDI TT (8N3). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Release the throttle cable from its fasteners on the engine cover. - Step 4
Remove the spark plug wire connectors from the spark plug wells.Replacement: spark plugs – AUDI TT (8N3). Tip from AUTODOC:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors. - Step 5
Clean dirt, dust and debris from inside the spark plug wells. - Step 6
Unscrew the spark plugs. Use the spark plug socket #16.Please note!To insert the spark plug wrench into the spark plug well of the cylinder #3, unplug the connector on the engine intake manifold. - Step 7
Take out the spark plugs. - Step 8
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 9
Install the new spark plugs into their mounting seats. - Step 10
Screw new spark plugs and tighten them. Use a torque wrench. Use the spark plug socket #16. Tighten it to 25 nm torque.Replacement: spark plugs – AUDI TT (8N3). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (8N3) model
Popular maintenance tutorials for Audi TT 8N
Complete guides for changing the Engine spark plug on different AUDI TT models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI TT Coupe (8N3)
View more
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
How to align the timing marks correctly on an EA888 engine
Why Is the Windscreen Washer Not Spraying? Solution
Most commonly replaced car parts on AUDI TT
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















