When to replace the Poly V-Belt on your AUDI TT
Recommended replacement interval for the part category Serpentine belt : 60000 km
Important!
This replacement procedure can be used for:
AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for TT Coupe (8N3) and other AUDI models
How to change Serpentine belt on Audi TT 8N 1.8 T – step-by-step instructions for straightforward car repair
Serpentine belt
How to change V-Ribbed Belt Set on Audi TT 8N 1.8 T – step-by-step instructions for straightforward car repair
V-Ribbed Belt Set
Tools
Replacement: serpentine belt – AUDI TT (8N3). Tools you'll need:
Combination spanner #16
Drive socket # 19
Ratchet wrench
Fender cover
Replacement: serpentine belt – AUDI TT (8N3). Tip from AUTODOC:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Poly V-Belt on Audi TT 8N 1998 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 5
    How to replace AUDI TT Coupe (8N3) 1.8 T 1999 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
    Replacement: serpentine belt – AUDI TT (8N3). AUTODOC recommends:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  3. Step 6
    Return the tensioner pulley to its initial position.
    Step 7
    Audi TT 8N 1.8 T quattro 2000 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
  4. Step 8
    Changing Poly V-Belt on AUDI TT Coupe (8N3) 1.8 T 2001 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI TT Coupe (8N3) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI TT Coupe (8N3) Poly V-Belt replacement - online guide
Tips & tricks for your AUDI TT Coupe (8N3)
View more
  • How to change Alternator belt on AUDI TT Coupe (8N3) 3.2 VR6 quattro - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
  • Changing Auxiliary belt Audi TT 8N 1.8 T - Replacement Tips
    TOP 4 car cleaning products | AUTODOC tips
  • Maintenance Hacks - AUDI TT Coupe (8N3) 1.8 T quattro Poly V-belt replacement guide
    How to check your head gasket | AUTODOC
  • Replace Drive belt on Audi TT 8N - free video tips
    DIY jack restoration | AUTODOC tips

Professional manuals for the most common AUDI models