How to carry out replacement: Poly V-Belt 1.2 16V Nissan Micra Mk3
Disclaimer
Change Nissan Micra Mk3 1.5 dCi Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on Nissan Micra K12 – replacement guide

downloads: 43
Views: 1819
Download your free tutorial and fix NISSAN MICRA III (K12) 1.4 16V problems yourself Download for free 1.55 MB Poly V-Belt for Nissan Micra Mk3 Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your NISSAN MICRA
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
NISSAN MICRA III (K12) 1.0 16V, NISSAN MICRA III (K12) 1.2 16V, NISSAN MICRA III (K12) 1.2 16V … View more

The steps may slightly vary depending on the car design.

How to change serpentine belt on NISSAN MICRA K12 [TUTORIAL AUTODOC]

video
Published on: 27/02/2023
19K views
All the parts you need to replace – Poly V-Belt for MICRA III (K12) and other NISSAN models
Alternative products
How to change Serpentine belt on Nissan Micra Mk3 1.2 16V – step-by-step instructions for straightforward car repair Serpentine belt
230670 MAPCO Serpentine belt
2,52 GBP
Shop
SK-3PK675 STARK Serpentine belt
2,65 GBP
Shop
305P0435 RIDEX Serpentine belt
2,98 GBP
Shop
SK-4PK665 STARK Serpentine belt
3,97 GBP
Shop
28741 FEBI BILSTEIN Serpentine belt
4,04 GBP
Shop
3PK668 METZGER Serpentine belt
4,08 GBP
Shop
3PK0668 FLENNOR Serpentine belt
4,20 GBP
Shop
3PK668 DAYCO Serpentine belt
4,82 GBP
Shop
3PK668 GATES Serpentine belt
5,44 GBP
Shop
3PK670 CONTITECH Serpentine belt
5,51 GBP
Shop
Tools
Replacement: serpentine belt – Nissan Micra K12. Tools you need:
Wire brush
Brake cleaner
Ceramic grease
Torque wrench
Combination spanner #14
Drive socket # 12
Drive socket # 27
Wheel impact socket #17
Ratchet wrench
Tap wrench
Clip removal tool
Wheel chock
Buy tools
Replacement: serpentine belt – Nissan Micra K12. AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – Nissan Micra K12. Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Poly V-Belt on Nissan Micra Mk3 2002 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    How to replace NISSAN MICRA III (K12) 1.2 16V 2003 Poly V-Belt - step-by-step manuals and video guides
    Raise the car.
    Replacement: serpentine belt – Nissan Micra K12. Tip:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
  3. Step 4
    Nissan Micra Mk3 1.4 16V 2004 Poly V-Belt replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. Nissan Micra K12
  4. Step 5
    Changing Poly V-Belt on NISSAN MICRA III (K12) 1.0 16V 2005 by yourself
    Remove the wheel.
  5. Step 6
    How to remove NISSAN MICRA 1.6 SR 160 2006 Poly V-Belt - online easy-to-follow instructions
    Remove the plastic clips of the wheel arch liner. Move the part aside. Use a clip removal tool.
  6. Step 7
    How to replace Poly V-Belt on NISSAN MICRA III (K12) 2007: download PDF manuals and video instructions
    Loosen the tensioner pulley fastener. Use a combination spanner #14.
  7. Step 8
    How hard is it to do yourself: Poly V-Belt replacement on Nissan Micra Mk3 1.2 16V 2008 - download illustrated guide
    Loosen the serpentine belt. Use a drive socket #12. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Poly V-Belt on NISSAN MICRA 2009? This free workshop manual will help you to do it yourself
    Remove the V-ribbed belt.
  9. Step 10
    Changing of Poly V-Belt on Nissan Micra Mk3 2010 won't be an issue if you follow this illustrated step-by-step guide
    Loosen the tensioner pulley fastener. Use a combination spanner #14.
  10. Step 11
    NISSAN MICRA 1.5 dCi Poly V-Belt replacement: online guides and video tutorials
    Loosen the serpentine belt. Use a drive socket #12. Use a ratchet wrench.
  11. Step 12
    Replacing Poly V-Belt on Nissan Micra Mk3 2003 1.2 16V by yourself
    Remove the V-ribbed belt.
    AUTODOC recommends:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  12. Step 13
    MICRA III (K12) 1.6 SR 160 2004 Poly V-Belt DIY replacement workshop manual
    Install the V-ribbed belt.
    Replacement: serpentine belt – Nissan Micra K12. AUTODOC experts recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  13. Step 14
    How to change Poly V-Belt on NISSAN MICRA III (K12) 2005 - tips and tricks
    Return the tensioner pulley to its initial position. Use a drive socket #12. Use a ratchet wrench.
    Replacement: serpentine belt – Nissan Micra K12. AUTODOC recommends:
    Make sure that the V-ribbed belt is properly tensioned.
  14. Step 15
    Step-by-step recommendations for DIY replacement Nissan Micra Mk3 2006 1.6 SR 160 Poly V-Belt
    Tighten the fastener of the serpentine belt tensioner pulley. Use a combination spanner #14. Use a torque wrench. Tighten it to 25 Nm torque.
  15. Step 16
    DIY replacement of Poly V-Belt on NISSAN MICRA III (K12) 1.5 dCi 2007 is not an issue anymore with our step-by-step tutorial
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  16. Step 17
    How to change Poly V-Belt on Nissan Micra Mk3 2002 - free PDF and video manuals
    Return the tensioner pulley to its initial position. Use a drive socket #12. Use a ratchet wrench.
    Replacement: serpentine belt – Nissan Micra K12. Tip from AUTODOC experts:
    Make sure that the V-ribbed belt is properly tensioned.
Comments – 1
  • @user_1787273
    05.08.2023 14:21
    Member
    thanks
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Micra III Hatchback (K12) model

Nissan Micra Mk3 tyre size

Popular maintenance tutorials for Nissan Micra Mk3

More manuals for Nissan Micra Mk3

Complete guides for changing the Alternator belt on different NISSAN MICRA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN MICRA III (K12) Poly V-Belt replacement - online guide
Tips & tricks for your NISSAN MICRA III (K12)
View more
  • How to change Alternator belt on NISSAN MICRA III (K12) 1.5 dCi - replacement tricks
    How to Install a New Windscreen Yourself | AUTODOC Expert Tips
    6K views
    Published on: 06/06/2024
  • Changing Auxiliary belt Nissan Micra Mk3 1.2 16V - Replacement Tips
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
    4K views
    Published on: 31/01/2023
  • Maintenance Hacks - NISSAN MICRA III (K12) 1.4 16V Poly V-belt replacement guide
    Coolant comparison test | AUTODOC
    14K views
    Published on: 18/02/2021
  • Replace Drive belt on Nissan Micra Mk3 - free video tips
    Top 5 reasons why the suspension knocks | AUTODOC tips
    2M views
    Published on: 09/09/2022

Most commonly replaced car parts on NISSAN MICRA

Professional manuals for the most common NISSAN models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN MICRA III (K12) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME