How to carry out replacement: Poly V-Belt 1.6 Tiida C12 Hatchback
Disclaimer
Change Tiida C12 Hatchback 1.5 Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on NISSAN TIIDA Hatchback (C12) – replacement guide

downloads: 3
Views: 175
Download your free tutorial and fix NISSAN TIIDA Hatchback (C12) 1.6 Flexfuel problems yourself Download for free 1.58 MB Poly V-Belt for Tiida C12 Hatchback Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your NISSAN TIIDA
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
NISSAN TIIDA Hatchback (C12) 1.6 CVTC, NISSAN TIIDA Hatchback (C12) 1.6 CVTC … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for TIIDA Hatchback (C12) and other NISSAN models
Alternative products
How to change Serpentine belt on Tiida C12 Hatchback 1.6 – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – NISSAN TIIDA Hatchback (C12). Tools you need:
Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Buy tools
Replacement: serpentine belt – NISSAN TIIDA Hatchback (C12). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN TIIDA Hatchback (C12). Take the following steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Tiida C12 Hatchback 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 4
    How to replace NISSAN TIIDA Hatchback (C12) 1.6 2013 Poly V-Belt - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Tiida C12 Hatchback 1.8 2014 Poly V-Belt replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. NISSAN TIIDA Hatchback (C12)
  4. Step 7
    Changing Poly V-Belt on NISSAN TIIDA Hatchback (C12) 1.5 2015 by yourself
    Remove the wheel.
  5. Step 8
    How to remove NISSAN TIIDA 1.6 CVTC 2016 Poly V-Belt - online easy-to-follow instructions
    Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench.
  6. Step 9
    How to replace Poly V-Belt on NISSAN TIIDA Hatchback (C12) 2017: download PDF manuals and video instructions
    Remove the wheel arch cover.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Tiida C12 Hatchback 1.8 2018 - download illustrated guide
    Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13.
  8. Step 11
    Need to know how to renew Poly V-Belt on NISSAN TIIDA 2019? This free workshop manual will help you to do it yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
  9. Step 12
    Changing of Poly V-Belt on Tiida C12 Hatchback 2020 won't be an issue if you follow this illustrated step-by-step guide
    Remove the V-ribbed belt.
  10. Step 13
    Return the tensioner pulley to its initial position.
    Replacement: serpentine belt – NISSAN TIIDA Hatchback (C12). AUTODOC experts recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 14
    NISSAN TIIDA 1.5 Poly V-Belt replacement: online guides and video tutorials
    Install the V-ribbed belt.
    Replacement: serpentine belt – NISSAN TIIDA Hatchback (C12). Tip from AUTODOC:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  11. Step 15
    Replacing Poly V-Belt on Tiida C12 Hatchback 2022 1.6 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Tiida Hatchback (C12) model

Tiida C12 Hatchback tyre size

Popular maintenance tutorials for Tiida C12 Hatchback

More manuals for Tiida C12 Hatchback

Complete guides for changing the Alternator belt on different NISSAN TIIDA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN TIIDA Hatchback (C12) Poly V-Belt replacement - online guide
Tips & tricks for your NISSAN TIIDA Hatchback (C12)
View more
  • How to change Alternator belt on NISSAN TIIDA Hatchback (C12) 1.6 Flexfuel - replacement tricks
    Revive Your Tyres: Expert Tips for a Lasting Shine | AUTODOC Guide
    4K views
    Published on: 07/04/2022
  • Changing Auxiliary belt Tiida C12 Hatchback 1.6 - Replacement Tips
    Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
    2K views
    Published on: 26/08/2021
  • Maintenance Hacks - NISSAN TIIDA Hatchback (C12) 1.8 Poly V-belt replacement guide
    Deep interior cleaning | Car transformation by detailing
    7K views
    Published on: 05/09/2024
  • Replace Drive belt on Tiida C12 Hatchback - free video tips
    Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
    19K views
    Published on: 23/07/2020

Most commonly replaced car parts on NISSAN TIIDA

Professional manuals for the most common NISSAN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN TIIDA Hatchback (C12) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME