Disclaimer
How to change serpentine belt on NISSAN Qashqai / Qashqai +2 I (J10, NJ10) – replacement guide
downloads:
153
Views:
2779
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi, NISSAN Qashqai / Qashqai +2 I (J10, NJ10) 1.5 dCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Qashqai / Qashqai +2 I (J10, NJ10) and other NISSAN models
Alternative products

Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Replacement: serpentine belt – NISSAN QASHQAI / QASHQAI +2 (J10, JJ10). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN QASHQAI / QASHQAI +2 (J10, JJ10). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Raise the front of the car and secure on supports.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. NISSAN QASHQAI / QASHQAI +2 (J10, JJ10) - Step 7
Remove the wheel. - Step 8
Remove the wheel arch cover. Use a clip removal tool. - Step 9
Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench. - Step 10
Remove the fuel filter fastening bracket. - Step 11
Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10. - Step 12
Remove the fuel filter fastening bracket. - Step 13
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 14
Remove the V-ribbed belt. - Step 15Return the tensioner pulley to its initial position.Replacement: serpentine belt – NISSAN QASHQAI / QASHQAI +2 (J10, JJ10). Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 16
Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 17
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 18
Place the V-ribbed belt on the tensioner pulley. - Step 19
Return the tensioner pulley to its initial position.
Comments –
1
- c.m.26.04.2023 21:02MemberDid not help needed to know if Adjuster was left or right handed thread on a 2007 model?
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the NISSAN Qashqai / Qashqai+2 I (J10, NJ10) model
Popular maintenance tutorials for Nissan Qashqai j10
Complete guides for changing the Alternator belt on different NISSAN QASHQAI models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your NISSAN Qashqai / Qashqai +2 I (J10, NJ10)
View more
2 ways to clean the EGR valve – which one is better?
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
Which Coolant is Best? Comparison Test | AUTODOC
Top 10 most useful car life hacks
Most commonly replaced car parts on NISSAN QASHQAI
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























