How to carry out replacement: Poly V-Belt 1.4 16V Nissan Micra k12 Convertible
Disclaimer
Change Nissan Micra k12 Convertible 1.4 16V Poly V-Belt yourself – manuals and video tutorials

How to change serpentine belt on NISSAN Micra C+C III (K12) – replacement guide

downloads: 6
Views: 220
Download your free tutorial and fix NISSAN Micra C+C III (K12) 1.6 160 SR problems yourself Download for free 1.5 MB Poly V-Belt for Nissan Micra k12 Convertible Shop now
Leave a comment Open in a new tab
When to replace the Poly V-Belt on your NISSAN MICRA
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
NISSAN Micra C+C III (K12) 1.4 16V … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Micra C+C III (K12) and other NISSAN models
Alternative products
How to change Serpentine belt on Nissan Micra k12 Convertible 1.4 16V – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – NISSAN MICRA C+C (K12). Tools you need:
Wire brush
Brake cleaner
Ceramic grease
Torque wrench
Combination spanner #14
Drive socket # 12
Drive socket # 27
Wheel impact socket #17
Ratchet wrench
Tap wrench
Clip removal tool
Wheel chock
Buy tools
Replacement: serpentine belt – NISSAN MICRA C+C (K12). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – NISSAN MICRA C+C (K12). Use the following procedure:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Poly V-Belt on Nissan Micra k12 Convertible 2005 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    Replacement: serpentine belt – NISSAN MICRA C+C (K12). Tip:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace NISSAN Micra C+C III (K12) 1.4 16V 2006 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. NISSAN MICRA C+C (K12)
  3. Step 5
    Nissan Micra k12 Convertible 1.6 160 SR 2007 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Poly V-Belt on NISSAN Micra C+C III (K12) 1.6 160 SR 2008 by yourself
    Remove the plastic clips of the wheel arch liner. Move the part aside. Use a clip removal tool.
  5. Step 7
    How to remove NISSAN MICRA 1.4 16V 2009 Poly V-Belt - online easy-to-follow instructions
    Loosen the tensioner pulley fastener. Use a combination spanner #14.
  6. Step 8
    How to replace Poly V-Belt on NISSAN Micra C+C III (K12) 2010: download PDF manuals and video instructions
    Loosen the serpentine belt. Use a drive socket #12. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Poly V-Belt replacement on Nissan Micra k12 Convertible 1.4 16V 2005 - download illustrated guide
    Remove the V-ribbed belt.
  8. Step 10
    Need to know how to renew Poly V-Belt on NISSAN MICRA 2006? This free workshop manual will help you to do it yourself
    Loosen the tensioner pulley fastener. Use a combination spanner #14.
  9. Step 11
    Changing of Poly V-Belt on Nissan Micra k12 Convertible 2007 won't be an issue if you follow this illustrated step-by-step guide
    Loosen the serpentine belt. Use a drive socket #12. Use a ratchet wrench.
  10. Step 12
    NISSAN MICRA 1.4 16V Poly V-Belt replacement: online guides and video tutorials
    Remove the V-ribbed belt.
    AUTODOC recommends:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  11. Step 13
    Replacing Poly V-Belt on Nissan Micra k12 Convertible 2009 1.4 16V by yourself
    Install the V-ribbed belt.
    Replacement: serpentine belt – NISSAN MICRA C+C (K12). AUTODOC experts recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  12. Step 14
    Micra C+C III (K12) 1.4 16V 2010 Poly V-Belt DIY replacement workshop manual
    Return the tensioner pulley to its initial position. Use a drive socket #12. Use a ratchet wrench.
    Replacement: serpentine belt – NISSAN MICRA C+C (K12). AUTODOC recommends:
    Make sure that the V-ribbed belt is properly tensioned.
  13. Step 15
    How to change Poly V-Belt on NISSAN Micra C+C III (K12) 2005 - tips and tricks
    Tighten the fastener of the serpentine belt tensioner pulley. Use a combination spanner #14. Use a torque wrench. Tighten it to 25 Nm torque.
  14. Step 16
    Step-by-step recommendations for DIY replacement Nissan Micra k12 Convertible 2006 1.4 16V Poly V-Belt
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  15. Step 17
    DIY replacement of Poly V-Belt on NISSAN Micra C+C III (K12) 1.4 16V 2007 is not an issue anymore with our step-by-step tutorial
    Return the tensioner pulley to its initial position. Use a drive socket #12. Use a ratchet wrench.
    Replacement: serpentine belt – NISSAN MICRA C+C (K12). Tip from AUTODOC experts:
    Make sure that the V-ribbed belt is properly tensioned.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN Micra C+C III (K12) model

Nissan Micra k12 Convertible tyre size

Popular maintenance tutorials for Nissan Micra k12 Convertible

More manuals for Nissan Micra k12 Convertible

Complete guides for changing the Alternator belt on different NISSAN MICRA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY NISSAN Micra C+C III (K12) Poly V-Belt replacement - online guide
Tips & tricks for your NISSAN Micra C+C III (K12)
View more
  • How to change Alternator belt on NISSAN Micra C+C III (K12) 1.4 16V - replacement tricks
    How to Swap an M50 Engine in a BMW E30 Turbo | AUTODOC Project
    2K views
    Published on: 15/02/2021
  • Changing Auxiliary belt Nissan Micra k12 Convertible 1.4 16V - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
    13K views
    Published on: 15/07/2021
  • Maintenance Hacks - NISSAN Micra C+C III (K12) 1.6 160 SR Poly V-belt replacement guide
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
    11K views
    Published on: 30/11/2023
  • Replace Drive belt on Nissan Micra k12 Convertible - free video tips
    Top 5 car noises you shouldn't ignore
    7K views
    Published on: 10/04/2025

Most commonly replaced car parts on NISSAN MICRA

Professional manuals for the most common NISSAN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
NISSAN Micra C+C III (K12) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME