How to carry out replacement: Engine Mount 1.6 16V Peugeot 307 Estate
Disclaimer
Change Peugeot 307 Estate 1.6 16V Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on PEUGEOT 307 Estate (3E) – replacement guide

downloads: 2
Views: 57
Download your free tutorial and fix PEUGEOT 307 Break (3E) 1.6 BioFlex problems yourself Download for free 1.49 MB Engine Mount for Peugeot 307 Estate Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 307 Break (3E) 1.6 HDi, PEUGEOT 307 Break (3E) 2.0 16V, PEUGEOT 307 Break (3E) 2.0 HDi, PEUGEOT 307 Break (3E) 1.6 HDi, PEUGEOT 307 Break (3E) 2.0 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for 307 Break (3E) and other PEUGEOT models
Alternative products
How to change Engine mount on Peugeot 307 Estate 1.6 16V – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – PEUGEOT 307 Break (3E). Tools you might need:
Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Buy tools
Replacement: engine mounts – PEUGEOT 307 Break (3E). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 307 Break (3E). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Peugeot 307 Estate 2002 - free PDF and video manuals
    Release the coolant reservoir retainers. Use a clip removal tool.
  2. Step 4
    How to replace PEUGEOT 307 Break (3E) 1.6 16V 2003 Engine Mount - step-by-step manuals and video guides
    Remove the coolant reservoir cap.
  3. Step 5
    Peugeot 307 Estate 1.6 HDi 2004 Engine Mount replacement: free workshop manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: engine mounts – PEUGEOT 307 Break (3E). Do not use excessive force when removing the part as this may damage it.
  4. Step 6
    Changing Engine Mount on PEUGEOT 307 Break (3E) 2.0 16V 2005 by yourself
    Support the engine in the oil pan area. Use a jack.
  5. Step 7
    How to remove PEUGEOT 307 2.0 2006 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Engine Mount on PEUGEOT 307 Break (3E) 2007: download PDF manuals and video instructions
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Engine Mount replacement on Peugeot 307 Estate 2.0 HDi 2008 - download illustrated guide
    Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Engine Mount on PEUGEOT 307 2009? This free workshop manual will help you to do it yourself
    Remove the engine mount.
    Replacement: engine mounts – PEUGEOT 307 Break (3E). AUTODOC recommends:
    Carefully check the other engine mounts and replace them if necessary.
  9. Step 11
    Changing of Engine Mount on Peugeot 307 Estate 2002 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolts.
  10. Step 12
    PEUGEOT 307 1.6 16V Engine Mount replacement: online guides and video tutorials
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Engine Mount on Peugeot 307 Estate 2004 1.6 16V by yourself
    Treat the engine mount fasteners. Use a sealant.
  12. Step 14
    307 Break (3E) 2.0 2005 Engine Mount DIY replacement workshop manual
    Install the engine mount to its mounting seat.
  13. Step 15
    How to change Engine Mount on PEUGEOT 307 Break (3E) 2006 - tips and tricks
    Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 307 Estate (3E) model

Peugeot 307 Estate tyre size

Popular maintenance tutorials for Peugeot 307 Estate

More manuals for Peugeot 307 Estate

Complete guides for changing the Engine mounts on different PEUGEOT 307 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 307 Break (3E) Engine Mount replacement - online guide
Tips & tricks for your PEUGEOT 307 Break (3E)
View more
  • How to change Engine mounts on PEUGEOT 307 Break (3E) 2.0 HDI - replacement tricks
    #DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
    7K views
    Published on: 18/07/2024
  • Changing Engine mounting Peugeot 307 Estate 1.6 16V - Replacement Tips
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
    7K views
    Published on: 20/05/2021
  • Maintenance Hacks - PEUGEOT 307 Break (3E) 1.6 HDi Motor mounts replacement guide
    Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
    8K views
    Published on: 12/05/2022
  • Replace Motor mount on Peugeot 307 Estate - free video tips
    2 ways to clean the EGR valve – which one is better?
    39K views
    Published on: 04/09/2025

Most commonly replaced car parts on PEUGEOT 307

Professional manuals for the most common PEUGEOT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 307 Break (3E) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME