Disclaimer
How to change right engine mounts on PEUGEOT 307 SW Box Body / Estate (3E_, 3H_) – replacement guide
downloads:
1
Views:
31
Important!
This replacement procedure can be used for:
PEUGEOT 307 SW Estate Van (3E_, 3H_) 1.6 HDi … View more
The steps may slightly vary depending on the car design.
PEUGEOT 307 SW Estate Van (3E_, 3H_) 1.6 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for 307 SW Estate Van (3E_, 3H_) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Replacement: engine mounts – PEUGEOT 307 SW Kasten/Kombi (3E_, 3H_). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: engine mounts – PEUGEOT 307 SW Kasten/Kombi (3E_, 3H_). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Release the coolant reservoir retainers. Use a clip removal tool. - Step 4
Remove the coolant reservoir cap. - Step 5
Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – PEUGEOT 307 SW Kasten/Kombi (3E_, 3H_). Do not use excessive force when removing the part as this may damage it. - Step 6
Support the engine in the oil pan area. Use a jack. - Step 7
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench. - Step 9
Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench. - Step 10
Remove the engine mount.Replacement: engine mounts – PEUGEOT 307 SW Kasten/Kombi (3E_, 3H_). AUTODOC recommends:Carefully check the other engine mounts and replace them if necessary. - Step 11
Remove the fastening bolts. - Step 12
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray. - Step 13
Treat the engine mount fasteners. Use a sealant. - Step 14
Install the engine mount to its mounting seat. - Step 15
Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 307 SW Box Body / Estate (3E_, 3H_) model
Popular maintenance tutorials for PEUGEOT 307 SW Kasten/Kombi (3E_, 3H_)
Complete guides for changing the Engine mounts on different PEUGEOT 307 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 307 SW Estate Van (3E_, 3H_)
View more
How to remove rust | AUTODOC tips
How to Get the Best Deals on Car Parts | Save Money with AUTODOC
Top 5 possible reasons your car is shaking or vibrating
5 reasons why your car is making a knocking sound
Most commonly replaced car parts on PEUGEOT 307
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



























