When to replace the Lambda Sensor on your PEUGEOT 307
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT 307 Break (3E) 2.0 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for 307 Break (3E) and other PEUGEOT models
Alternative products
How to change Lambda sensor on Peugeot 307 Estate 1.6 16V – step-by-step instructions for straightforward car repair Lambda sensor
Tools
Replacement: lambda sensor – PEUGEOT 307 Break (3E). Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – PEUGEOT 307 Break (3E). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT 307 Break (3E) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Peugeot 307 Estate 2002 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT 307 Break (3E) 1.6 16V 2003 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Peugeot 307 Estate 1.6 HDi 2004 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT 307 Break (3E) 2.0 16V 2005 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT 307 2.0 2006 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT 307 Break (3E) 2007: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 307 Estate (3E) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 307 Break (3E) Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT 307 Break (3E)
View more
  • How to change Oxygen sensor on PEUGEOT 307 Break (3E) 2.0 HDI - replacement tricks
    How I started restoring a driveshaft | Drivetrain restoration – Part 1
  • Changing O2 sensor Peugeot 307 Estate 1.6 16V - Replacement Tips
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
  • Maintenance Hacks - PEUGEOT 307 Break (3E) 1.6 HDi NOx sensor replacement guide
    How to easily repair a punctured tyre | AUTODOC tips
  • Replace Lambda sensors on Peugeot 307 Estate - free video tips
    Unveiling the secrets: Detecting vacuum leaks with a Smoke Machine | AUTODOC
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 307 Break (3E) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME