How to carry out replacement: Engine Mount 1.6 TDCi Ford Focus mk2 Saloon
Disclaimer
Change Ford Focus mk2 Saloon 1.6 TDCi Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on Ford Focus MK2 – replacement guide

downloads: 19
Views: 531
Download your free tutorial and fix FORD Focus II Saloon (DB_, FCH, DH) 1.8 problems yourself Download for free 1.36 MB Engine Mount for Ford Focus mk2 Saloon Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD Focus II Saloon (DB_, FCH, DH) 1.4, FORD Focus II Saloon (DB_, FCH, DH) 1.6, FORD Focus II Saloon (DB_, FCH, DH) 1.6 Ti, FORD Focus II Saloon (DB_, FCH, DH) 2.0, FORD Focus II Saloon (DB_, FCH, DH) 1.6 TDCi, FORD Focus II Saloon (DB_, FCH, DH) 1.8 TDCi, FORD Focus II Saloon (DB_, FCH, DH) 2.0 TDCi, FORD Focus II Saloon (DB_, FCH, DH) 1.8 Flexifuel, FORD Focus II Saloon (DB_, FCH, DH) 1.8 Flexifuel, FORD Focus II Saloon (DB_, FCH, DH) 2.0 TDCi, FORD Focus II Saloon (DB_, FCH, DH) 1.8 … View more

The steps may slightly vary depending on the car design.

How to replace engine mount on FORD FOCUS MK2 Saloon [TUTORIAL AUTODOC]

video
Published on: 29/10/2020
22K views
All the parts you need to replace – Engine Mount for Focus II Saloon (DB_, FCH, DH) and other FORD models
Alternative products
How to change Engine mount on Ford Focus mk2 Saloon 1.6 TDCi – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – Ford Focus MK2. Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # E11
Drive socket # 16
Drive socket # 18
Ratchet wrench
Jack
Fender cover
Buy tools
Replacement: engine mounts – Ford Focus MK2. Tip:
  • All work should be done with the engine stopped.
Replacement: engine mounts – Ford Focus MK2. Recommended sequence of steps:
  1. Step 1
    How to change Engine Mount on Ford Focus mk2 Saloon 2005 - free PDF and video manuals
    Open the bonnet.
  2. Step 2
    How to replace FORD Focus II Saloon (DB_, FCH, DH) 1.6 TDCi 2006 Engine Mount - step-by-step manuals and video guides
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
  3. Step 3
    Ford Focus mk2 Saloon 1.8 TDCi 2007 Engine Mount replacement: free workshop manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: engine mounts – Ford Focus MK2. Do not use excessive force when removing the part as this may damage it.
  4. Step 4
    Changing Engine Mount on FORD Focus II Saloon (DB_, FCH, DH) 2.0 TDCi 2008 by yourself
    Support the engine in the oil pan area. Use a jack.
  5. Step 5
    How to remove FORD FOCUS 1.6 Ti 2009 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 6
    How to replace Engine Mount on FORD Focus II Saloon (DB_, FCH, DH) 2010: download PDF manuals and video instructions
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  7. Step 7
    How hard is it to do yourself: Engine Mount replacement on Ford Focus mk2 Saloon 1.4 2011 - download illustrated guide
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 8
    Need to know how to renew Engine Mount on FORD FOCUS 2012? This free workshop manual will help you to do it yourself
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #18. Use a ratchet wrench.
  9. Step 9
    Remove the hydraulic transmission jack.
    Step 10
    Changing of Engine Mount on Ford Focus mk2 Saloon 2013 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the engine mount fasteners. Use a drive socket #Е11. Use a ratchet wrench.
  10. Step 11
    FORD FOCUS 1.6 TDCi Engine Mount replacement: online guides and video tutorials
    Remove the engine mount.
    Replacement: engine mounts – Ford Focus MK2. Tip from AUTODOC:
    Carefully check the other engine mounts and replace them if necessary.
  11. Step 12
    Replacing Engine Mount on Ford Focus mk2 Saloon 2015 1.6 TDCi by yourself
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
Comments – 2
  • M.E.
    06.04.2025 13:46
    Member
    In Haynes Manual, the torque values are different! 90Nm (66 lbf ft) and 56Nm (41 lbf ft)!
    • @Graziana Venturi
      07.04.2025 14:25
      M.E.
      Moderator
      Torque values ​​may vary depending on the design features of your vehicle.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Saloon (DB_, FCH, DH) model

Ford Focus mk2 Saloon tyre size

Popular maintenance tutorials for Ford Focus mk2 Saloon

More manuals for Ford Focus mk2 Saloon

Complete guides for changing the Engine mounts on different FORD FOCUS models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD Focus II Saloon (DB_, FCH, DH) Engine Mount replacement - online guide
Tips & tricks for your FORD Focus II Saloon (DB_, FCH, DH)
View more
  • How to change Engine mounts on FORD Focus II Saloon (DB_, FCH, DH) 1.6 - replacement tricks
    Three ways to change oil without a lift
    9K views
    Published on: 18/09/2025
  • Changing Engine mounting Ford Focus mk2 Saloon 1.6 TDCi - Replacement Tips
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
    7K views
    Published on: 20/05/2021
  • Maintenance Hacks - FORD Focus II Saloon (DB_, FCH, DH) 1.8 TDCi Motor mounts replacement guide
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
    12K views
    Published on: 13/10/2020
  • Replace Motor mount on Ford Focus mk2 Saloon - free video tips
    Coolant comparison test | AUTODOC
    14K views
    Published on: 18/02/2021

Most commonly replaced car parts on FORD FOCUS

Professional manuals for the most common FORD models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD Focus II Saloon (DB_, FCH, DH) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME