How to carry out replacement: Engine Mount 1.6 TDCi Ford Focus Mk2
Disclaimer
Change Ford Focus Mk2 2.0 Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on FORD Focus II Hatchback (DA_, HCP, DP) – replacement guide

downloads: 12
Views: 224
Download your free tutorial and fix FORD Focus II Hatchback (DA_, HCP, DP) 1.4 problems yourself Download for free 1.2 MB Engine Mount for Ford Focus Mk2 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 Ti, FORD Focus II Hatchback (DA_, HCP, DP) 2.0, FORD Focus II Hatchback (DA_, HCP, DP) 1.4, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.8 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.8 Flexifuel, FORD Focus II Hatchback (DA_, HCP, DP) 1.8 Flexifuel, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.8, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 CNG, FORD Focus II Hatchback (DA_, HCP, DP) 2.0 LPG, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 LPG … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for Focus II Hatchback (DA_, HCP, DP) and other FORD models
Alternative products
How to change Engine mount on Ford Focus Mk2 1.6 TDCi – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – FORD FOCUS II (DA_). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # E11
Drive socket # 16
Drive socket # 18
Ratchet wrench
Jack
Fender cover
Buy tools
Replacement: engine mounts – FORD FOCUS II (DA_). Tip:
  • All work should be done with the engine stopped.
Replacement: engine mounts – FORD FOCUS II (DA_). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Ford Focus Mk2 2004 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: engine mounts – FORD FOCUS II (DA_). Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi 2005 Engine Mount - step-by-step manuals and video guides
    Support the engine in the oil pan area. Use a jack.
  3. Step 5
    Ford Focus Mk2 1.8 TDCi 2006 Engine Mount replacement: free workshop manuals
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  4. Step 6
    Changing Engine Mount on FORD Focus II Hatchback (DA_, HCP, DP) 2.5 ST 2007 by yourself
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  5. Step 7
    How to remove FORD FOCUS 1.6 Ti 2008 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Engine Mount on FORD Focus II Hatchback (DA_, HCP, DP) 2009: download PDF manuals and video instructions
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #18. Use a ratchet wrench.
  7. Step 9
    Remove the hydraulic transmission jack.
    Step 10
    How hard is it to do yourself: Engine Mount replacement on Ford Focus Mk2 1.8 Flexifuel 2010 - download illustrated guide
    Unscrew the engine mount fasteners. Use a drive socket #Е11. Use a ratchet wrench.
  8. Step 11
    Need to know how to renew Engine Mount on FORD FOCUS 2011? This free workshop manual will help you to do it yourself
    Remove the engine mount.
    Replacement: engine mounts – FORD FOCUS II (DA_). Tip from AUTODOC:
    Carefully check the other engine mounts and replace them if necessary.
  9. Step 12
    Changing of Engine Mount on Ford Focus Mk2 2012 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Hatchback (DA_, HCP, DP) model

Ford Focus Mk2 tyre size

Popular maintenance tutorials for Ford Focus Mk2

More manuals for Ford Focus Mk2

Complete guides for changing the Engine mounts on different FORD FOCUS models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD Focus II Hatchback (DA_, HCP, DP) Engine Mount replacement - online guide
Tips & tricks for your FORD Focus II Hatchback (DA_, HCP, DP)
View more
  • How to change Engine mounts on FORD Focus II Hatchback (DA_, HCP, DP) 1.6 - replacement tricks
    Top 5 car noises you shouldn't ignore
    7K views
    Published on: 10/04/2025
  • Changing Engine mounting Ford Focus Mk2 1.6 TDCi - Replacement Tips
    Save Money on Fuel with These Easy Tips | AUTODOC
    5K views
    Published on: 27/09/2022
  • Maintenance Hacks - FORD Focus II Hatchback (DA_, HCP, DP) 1.8 TDCi Motor mounts replacement guide
    Coolant comparison test | AUTODOC
    14K views
    Published on: 18/02/2021
  • Replace Motor mount on Ford Focus Mk2 - free video tips
    Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
    7K views
    Published on: 30/03/2022

Most commonly replaced car parts on FORD FOCUS

Professional manuals for the most common FORD models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD Focus II Hatchback (DA_, HCP, DP) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME