How to carry out replacement: Engine Mount 1.6 16V Ford Focus Mk1
Disclaimer
Change Ford Focus Mk1 1.6 16V Flexifuel Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on Ford Focus DAW – replacement guide

downloads: 12
Views: 327
Download your free tutorial and fix FORD FOCUS (DAW, DBW) 1.8 DI / TDDi problems yourself Download for free 1.58 MB Engine Mount for Ford Focus Mk1 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD FOCUS (DAW, DBW) 1.8 Turbo DI / TDDi, FORD FOCUS (DAW, DBW) 1.8 TDCi … View more

The steps may slightly vary depending on the car design.

How to replace engine mount on FORD FOCUS (DAW) [TUTORIAL AUTODOC]

video
Published on: 21/12/2020
4K views
All the parts you need to replace – Engine Mount for FOCUS (DAW, DBW) and other FORD models
Alternative products
How to change Engine mount on Ford Focus Mk1 1.6 16V – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – Ford Focus DAW. Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 10
Drive socket # 16
Ratchet wrench
Flat Screwdriver
Jack
Fender cover
Buy tools
Replacement: engine mounts – Ford Focus DAW. AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – Ford Focus DAW. Use the following procedure:
  1. Step 1
    How to change Engine Mount on Ford Focus Mk1 1998 - free PDF and video manuals
    Open the bonnet.
  2. Step 2
    How to replace FORD FOCUS (DAW, DBW) 1.6 16V 1999 Engine Mount - step-by-step manuals and video guides
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
  3. Step 3
    Ford Focus Mk1 1.8 Turbo DI / TDDi 2000 Engine Mount replacement: free workshop manuals
    Unscrew the fasteners of the coolant reservoir. Use a drive socket #10. Use a ratchet wrench.
  4. Step 4
    Changing Engine Mount on FORD FOCUS (DAW, DBW) 1.4 16V 2001 by yourself
    Release the coolant reservoir retainers. Use a flat screwdriver.
  5. Step 5
    How to remove FORD FOCUS 1.8 16V 2002 Engine Mount - online easy-to-follow instructions
    Remove the coolant reservoir.
  6. Step 6
    How to replace Engine Mount on FORD FOCUS (DAW, DBW) 2003: download PDF manuals and video instructions
    Support the engine in the oil pan area. Use a jack.
  7. Step 7
    How hard is it to do yourself: Engine Mount replacement on Ford Focus Mk1 2.0 16V 2004 - download illustrated guide
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 8
    Need to know how to renew Engine Mount on FORD FOCUS 2005? This free workshop manual will help you to do it yourself
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  9. Step 9
    Changing of Engine Mount on Ford Focus Mk1 2006 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
  10. Step 10
    FORD FOCUS 1.6 16V Flexifuel Engine Mount replacement: online guides and video tutorials
    Remove the engine mount.
    Replacement: engine mounts – Ford Focus DAW. Tip from AUTODOC experts:
    Carefully check the other engine mounts and replace them if necessary.
  11. Step 11
    Replacing Engine Mount on Ford Focus Mk1 1998 1.6 16V by yourself
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  12. Step 12
    FOCUS (DAW, DBW) 1.8 16V 1999 Engine Mount DIY replacement workshop manual
    Install the engine mount to its mounting seat.
  13. Step 13
    How to change Engine Mount on FORD FOCUS (DAW, DBW) 2000 - tips and tricks
    Raise the jack by 10–15 cm.
  14. Step 14
    Step-by-step recommendations for DIY replacement Ford Focus Mk1 2001 1.8 16V Engine Mount
    Screw in the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk1 Hatchback (DAW, DBW) model

Ford Focus Mk1 tyre size

Popular maintenance tutorials for Ford Focus Mk1

More manuals for Ford Focus Mk1

Complete guides for changing the Engine mounts on different FORD FOCUS models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FORD FOCUS (DAW, DBW) Engine Mount replacement - online guide
Tips & tricks for your FORD FOCUS (DAW, DBW)
View more
  • How to change Engine mounts on FORD FOCUS (DAW, DBW) 1.8 TDCi - replacement tricks
    How to tighten cylinder head bolts
    13K views
    Published on: 06/03/2025
  • Changing Engine mounting Ford Focus Mk1 1.6 16V - Replacement Tips
    Deep interior cleaning | Car transformation by detailing
    7K views
    Published on: 05/09/2024
  • Maintenance Hacks - FORD FOCUS (DAW, DBW) 1.8 Turbo DI / TDDi Motor mounts replacement guide
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
    9K views
    Published on: 04/07/2024
  • Replace Motor mount on Ford Focus Mk1 - free video tips
    Checking the starter without removing it | AUTODOC tips
    28K views
    Published on: 01/12/2020

Most commonly replaced car parts on FORD FOCUS

Professional manuals for the most common FORD models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FORD FOCUS (DAW, DBW) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME