Disclaimer
How to change right engine mounts on FORD FOCUS III Turnier – replacement guide
downloads:
24
Views:
519
Important!
This replacement procedure can be used for:
FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Flexifuel, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 Ti … View more
The steps may slightly vary depending on the car design.
FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Flexifuel, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 Ti … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for FOCUS III Turnier and other FORD models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # E11
Drive socket # 16
Drive socket # 18
Ratchet wrench
Jack
Fender cover
Replacement: engine mounts – FORD FOCUS III Turnier. Tip:
- All work should be done with the engine stopped.
Replacement: engine mounts – FORD FOCUS III Turnier. Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – FORD FOCUS III Turnier. Do not use excessive force when removing the part as this may damage it. - Step 4
Support the engine in the oil pan area. Use a jack. - Step 5
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 6
Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench. - Step 7
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #18. Use a ratchet wrench. - Step 9Remove the hydraulic transmission jack.Step 10
Unscrew the engine mount fasteners. Use a drive socket #Е11. Use a ratchet wrench. - Step 11
Remove the engine mount.Replacement: engine mounts – FORD FOCUS III Turnier. Tip from AUTODOC:Carefully check the other engine mounts and replace them if necessary. - Step 12
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk3 Estate (DYB) model
Popular maintenance tutorials for Ford Focus Mk3 Estate
Complete guides for changing the Engine mounts on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FOCUS III Turnier
View more
DIY vehicle AC compressor restoration
What to do if your check engine light is on | AUTODOC tips
5 Ways You’re Scrubbing Your Car Wrong | AUTODOC Tips
How to Make a DIY Foam Sprayer | AUTODOC tips
Most commonly replaced car parts on FORD FOCUS
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























