How to carry out replacement: Engine Mount 1.8 TDCi FORD Focus Mk1 Kasten / Kombi (DNW)
Disclaimer
Change FORD Focus Mk1 Kasten / Kombi (DNW) 1.4 Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on FORD Focus Mk1 Box Body / Estate (DNW) – replacement guide

downloads: 1
Views: 32
Download your free tutorial and fix FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDDi problems yourself Download for free 1.39 MB Engine Mount for FORD Focus Mk1 Kasten / Kombi (DNW) Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDCi, FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDCi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for Focus Mk1 Box Body / Estate (DNW) and other FORD models
How to change Engine mount on FORD Focus Mk1 Kasten / Kombi (DNW) 1.8 TDCi – step-by-step instructions for straightforward car repair Engine mount
How to change Engine mount on Focus Mk1 Box Body / Estate (DNW) – tips for proper car maintenance
Engine mount for Focus Mk1 Box Body / Estate (DNW) Diesel (101 hp)
Simple DIY car repair steps – Replacing Engine mount on Focus Mk1 Box Body / Estate (DNW)
Engine mount for Focus Mk1 Box Body / Estate (DNW) Diesel (116 hp)
Tools
Replacement: engine mounts – FORD Focus Mk1 Kasten / Kombi (DNW). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 10
Drive socket # 16
Ratchet wrench
Flat Screwdriver
Jack
Fender cover
Buy tools
Replacement: engine mounts – FORD Focus Mk1 Kasten / Kombi (DNW). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – FORD Focus Mk1 Kasten / Kombi (DNW). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on FORD Focus Mk1 Kasten / Kombi (DNW) 1998 - free PDF and video manuals
    Unscrew the fasteners of the coolant reservoir. Use a drive socket #10. Use a ratchet wrench.
  2. Step 4
    How to replace FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDCi 1999 Engine Mount - step-by-step manuals and video guides
    Release the coolant reservoir retainers. Use a flat screwdriver.
  3. Step 5
    FORD Focus Mk1 Kasten / Kombi (DNW) 1.6 2000 Engine Mount replacement: free workshop manuals
    Remove the coolant reservoir.
  4. Step 6
    Changing Engine Mount on FORD Focus Mk1 Box Body / Estate (DNW) 1.4 2001 by yourself
    Support the engine in the oil pan area. Use a jack.
  5. Step 7
    How to remove FORD FOCUS 1.8 2002 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Engine Mount on FORD Focus Mk1 Box Body / Estate (DNW) 2003: download PDF manuals and video instructions
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Engine Mount replacement on FORD Focus Mk1 Kasten / Kombi (DNW) 1.6 2004 - download illustrated guide
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Engine Mount on FORD FOCUS 2005? This free workshop manual will help you to do it yourself
    Remove the engine mount.
    Replacement: engine mounts – FORD Focus Mk1 Kasten / Kombi (DNW). Tip from AUTODOC experts:
    Carefully check the other engine mounts and replace them if necessary.
  9. Step 11
    Changing of Engine Mount on FORD Focus Mk1 Kasten / Kombi (DNW) 1998 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  10. Step 12
    FORD FOCUS 1.4 Engine Mount replacement: online guides and video tutorials
    Install the engine mount to its mounting seat.
  11. Step 13
    Replacing Engine Mount on FORD Focus Mk1 Kasten / Kombi (DNW) 2000 1.8 TDCi by yourself
    Raise the jack by 10–15 cm.
  12. Step 14
    Focus Mk1 Box Body / Estate (DNW) 1.8 2001 Engine Mount DIY replacement workshop manual
    Screw in the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk1 Box Body / Estate (DNW) model.

FORD Focus Mk1 Kasten / Kombi (DNW) tyre size

Popular maintenance tutorials for FORD Focus Mk1 Kasten / Kombi (DNW)

More manuals for FORD Focus Mk1 Kasten / Kombi (DNW)

Complete guides for changing the Engine mounts on different FORD FOCUS models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD Focus Mk1 Box Body / Estate (DNW) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD Focus Mk1 Box Body / Estate (DNW) Engine Mount replacement - online guide
Tips & tricks for your FORD Focus Mk1 Box Body / Estate (DNW)
View more
  • How to change Engine mounts on FORD Focus Mk1 Box Body / Estate (DNW) 1.8 TDDi - replacement tricks
    What to do if the belt squeals | AUTODOC tips
    4K views
    Published on: 04/03/2021
  • Changing Engine mounting FORD Focus Mk1 Kasten / Kombi (DNW) 1.8 TDCi - Replacement Tips
    How to start a car after a long idle period | AUTODOC tips
    6K views
    Published on: 20/05/2021
  • Maintenance Hacks - FORD Focus Mk1 Box Body / Estate (DNW) 1.6 Motor mounts replacement guide
    Top 5 reasons why the suspension knocks | AUTODOC tips
    1M views
    Published on: 09/09/2022
  • Replace Motor mount on FORD Focus Mk1 Kasten / Kombi (DNW) - free video tips
    Checking the starter without removing it | AUTODOC tips
    19K views
    Published on: 01/12/2020

Most commonly replaced car parts on FORD FOCUS

Professional manuals for the most common FORD models