How to carry out replacement: Engine Mount 2.0 TDCi Ford Focus DB3
Disclaimer
Change Ford Focus DB3 1.6 Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on FORD FOCUS II Convertible – replacement guide

downloads: 4
Views: 59
Download your free tutorial and fix FORD FOCUS II Convertible 2.0 problems yourself Download for free 1.19 MB Engine Mount for Ford Focus DB3 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FORD FOCUS II Convertible 1.6, FORD FOCUS II Convertible 2.0, FORD FOCUS II Convertible 2.0 TDCi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for FOCUS II Convertible and other FORD models
How to change Engine mount on Ford Focus DB3 2.0 TDCi – step-by-step instructions for straightforward car repair Engine mount
How to change Engine mount on Focus Mk2 Convertible (DB3) – tips for proper car maintenance
Engine mount for Focus Mk2 Convertible (DB3) Petrol (100 hp)
Simple DIY car repair steps – Replacing Engine mount on Focus Mk2 Convertible (DB3)
Engine mount for Focus Mk2 Convertible (DB3) Petrol (145 hp)
Easy tricks to help you to replace Engine mount on Focus Mk2 Convertible (DB3)
Engine mount for Focus Mk2 Convertible (DB3) Diesel (136 hp)
Tools
Replacement: engine mounts – FORD FOCUS II Convertible. Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # E11
Drive socket # 16
Drive socket # 18
Ratchet wrench
Jack
Fender cover
Buy tools
Replacement: engine mounts – FORD FOCUS II Convertible. Tip:
  • All work should be done with the engine stopped.
Replacement: engine mounts – FORD FOCUS II Convertible. Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Ford Focus DB3 2006 - free PDF and video manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: engine mounts – FORD FOCUS II Convertible. Do not use excessive force when removing the part as this may damage it.
  2. Step 4
    How to replace FORD FOCUS II Convertible 2.0 TDCi 2007 Engine Mount - step-by-step manuals and video guides
    Support the engine in the oil pan area. Use a jack.
  3. Step 5
    Ford Focus DB3 2.0 2008 Engine Mount replacement: free workshop manuals
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  4. Step 6
    Changing Engine Mount on FORD FOCUS II Convertible 2.0 TDCi 2009 by yourself
    Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench.
  5. Step 7
    How to remove FORD FOCUS 2.0 2010 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Engine Mount on FORD FOCUS II Convertible 2006: download PDF manuals and video instructions
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #18. Use a ratchet wrench.
  7. Step 9
    Remove the hydraulic transmission jack.
    Step 10
    How hard is it to do yourself: Engine Mount replacement on Ford Focus DB3 2.0 TDCi 2007 - download illustrated guide
    Unscrew the engine mount fasteners. Use a drive socket #Е11. Use a ratchet wrench.
  8. Step 11
    Need to know how to renew Engine Mount on FORD FOCUS 2008? This free workshop manual will help you to do it yourself
    Remove the engine mount.
    Replacement: engine mounts – FORD FOCUS II Convertible. Tip from AUTODOC:
    Carefully check the other engine mounts and replace them if necessary.
  9. Step 12
    Changing of Engine Mount on Ford Focus DB3 2009 won't be an issue if you follow this illustrated step-by-step guide
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Convertible (DB3) model.

Browse tyres

Popular maintenance tutorials for Ford Focus DB3

More manuals for Ford Focus DB3

Complete guides for changing the Engine mounts on different FORD FOCUS models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
FORD FOCUS II Convertible Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY FORD FOCUS II Convertible Engine Mount replacement - online guide
Tips & tricks for your FORD FOCUS II Convertible
View more
  • How to change Engine mounts on FORD FOCUS II Convertible 1.6 - replacement tricks
    How to check your head gasket | AUTODOC
    9K views
    Published on: 13/10/2020
  • Changing Engine mounting Ford Focus DB3 2.0 TDCi - Replacement Tips
    How to reduce fuel consumption | AUTODOC
    4K views
    Published on: 27/09/2022
  • Maintenance Hacks - FORD FOCUS II Convertible 2.0 Motor mounts replacement guide
    How to detect vacuum leaks using a smoke machine | AUTODOC
    19K views
    Published on: 23/07/2020
  • Replace Motor mount on Ford Focus DB3 - free video tips
    5 most common causes of oil leaks | AUTODOC tips
    15K views
    Published on: 30/03/2023

Most commonly replaced car parts on FORD FOCUS

Professional manuals for the most common FORD models