Disclaimer
How to change ignition coil on FORD FOCUS III Turnier – replacement guide
downloads:
1
Views:
37
Important!
This replacement procedure can be used for:
FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Flexifuel, FORD FOCUS III Turnier 1.6 EcoBoost, FORD FOCUS III Turnier 1.6 EcoBoost, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 Ti … View more
The steps may slightly vary depending on the car design.
FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 Flexifuel, FORD FOCUS III Turnier 1.6 EcoBoost, FORD FOCUS III Turnier 1.6 EcoBoost, FORD FOCUS III Turnier 1.6 Ti, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 LPG, FORD FOCUS III Turnier 1.6 Ti … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for FOCUS III Turnier and other FORD models
Alternative products

Electronic spray
Torque wrench
Torx bit T20
Ratchet wrench
Fender cover
Replacement: ignition coil – FORD FOCUS III Turnier. Tip from AUTODOC experts:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – FORD FOCUS III Turnier. Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: ignition coil – FORD FOCUS III Turnier. Do not use excessive force when removing the part as this may damage it. - Step 4
Detach the connector from the ignition coil. - Step 5
Make marks to indicate the order of installation of the spark plug wires. - Step 6
Disconnect the spark plug wires from the ignition coil.AUTODOC recommends:Be careful to avoid damaging spark plug wires.Remember the position of the spark plug wires. - Step 7
Unscrew the ignition coil bracket. Use Torx T20. Use a ratchet wrench. - Step 8
Remove the ignition coil. - Step 9
Install a new ignition coil. - Step 10
Tighten the ignition coil fastening. Use Torx T20. Use a torque wrench. Tighten it to 8 nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk3 Estate (DYB) model
Popular maintenance tutorials for Ford Focus Mk3 Estate
Complete guides for changing the Coil pack on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FOCUS III Turnier
View more
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
#DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
DIY brake caliper restoration | AUTODOC tips
Most commonly replaced car parts on FORD FOCUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























