Disclaimer
How to change serpentine belt on FORD Focus II Hatchback (DA_, HCP, DP) – replacement guide
downloads:
45
Views:
936
Recommended replacement interval for the part category Serpentine belt : 10 year / 200000 km
Important!
This replacement procedure can be used for:
FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi, FORD Focus II Hatchback (DA_, HCP, DP) 1.6 TDCi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Focus II Hatchback (DA_, HCP, DP) and other FORD models
Alternative products

Combination spanner #15
Torx bit T30
Ratchet wrench
Fender cover
Replacement: serpentine belt – FORD FOCUS II (DA_). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – FORD FOCUS II (DA_). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4
Undo the fasteners of the oil pan lower cover. Use Torx T30. Use a ratchet wrench. - Step 5
Remove the oil pan cover. - Step 6
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15. - Step 7
Remove the V-ribbed belt. - Step 8Return the tensioner pulley to its initial position.Replacement: serpentine belt – FORD FOCUS II (DA_). Professionals recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 9
Install the V-ribbed belt.Replacement: serpentine belt – FORD FOCUS II (DA_). AUTODOC experts recommend:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 10Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #15.Step 11
Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk2 Hatchback (DA_, HCP, DP) model
Popular maintenance tutorials for Ford Focus Mk2
Complete guides for changing the Alternator belt on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD Focus II Hatchback (DA_, HCP, DP)
View more
How I started restoring a driveshaft | Drivetrain restoration – Part 1
5 signs of a faulty strut mount and how to fix it
5 causes of turbocharger failure and how to avoid them
Top 5 mistakes when replacing spark plugs | AUTODOC tips
Most commonly replaced car parts on FORD FOCUS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
















