Disclaimer
How to change right engine mounts on FORD FOCUS III Box Body / Hatchback – replacement guide
downloads:
3
Views:
134
Important!
This replacement procedure can be used for:
FORD FOCUS III Box Body / Hatchback 1.6 Ti … View more
The steps may slightly vary depending on the car design.
FORD FOCUS III Box Body / Hatchback 1.6 Ti … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for FOCUS III Box Body / Hatchback and other FORD models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # E11
Drive socket # 16
Drive socket # 18
Ratchet wrench
Jack
Fender cover
Replacement: engine mounts – FORD FOCUS III Box Body / Hatchback. Tip:
- All work should be done with the engine stopped.
Replacement: engine mounts – FORD FOCUS III Box Body / Hatchback. Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – FORD FOCUS III Box Body / Hatchback. Do not use excessive force when removing the part as this may damage it. - Step 4
Support the engine in the oil pan area. Use a jack. - Step 5
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 6
Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench. - Step 7
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #18. Use a ratchet wrench. - Step 9Remove the hydraulic transmission jack.Step 10
Unscrew the engine mount fasteners. Use a drive socket #Е11. Use a ratchet wrench. - Step 11
Remove the engine mount.Replacement: engine mounts – FORD FOCUS III Box Body / Hatchback. Tip from AUTODOC:Carefully check the other engine mounts and replace them if necessary. - Step 12
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FORD Focus Mk3 Box Body / Hatchback model
Popular maintenance tutorials for FORD FOCUS III Box Body / Hatchback
Complete guides for changing the Engine mounts on different FORD FOCUS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FORD FOCUS III Box Body / Hatchback
View more
How to inspect and troubleshoot your car heater when it’s not working
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Most commonly replaced car parts on FORD FOCUS
ОЕ number
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























