Disclaimer
How to change rear wheel bearing on TOYOTA Yaris Verso (_P2_) – replacement guide
downloads:
3
Views:
25
Important!
This replacement procedure can be used for:
TOYOTA Yaris Verso (_P2_) 1.5 (NCP21_), TOYOTA Yaris Verso (_P2_) 1.3 (NCP20_, NCP22_), TOYOTA Yaris Verso (_P2_) 1.4 D-4D (NLP20_, NLP22_), TOYOTA Yaris Verso (_P2_) 1.5 (NCP21_), TOYOTA Yaris Verso (_P2_) 1.3 (NCP20_, NCP22_) … View more
The steps may slightly vary depending on the car design.
TOYOTA Yaris Verso (_P2_) 1.5 (NCP21_), TOYOTA Yaris Verso (_P2_) 1.3 (NCP20_, NCP22_), TOYOTA Yaris Verso (_P2_) 1.4 D-4D (NLP20_, NLP22_), TOYOTA Yaris Verso (_P2_) 1.5 (NCP21_), TOYOTA Yaris Verso (_P2_) 1.3 (NCP20_, NCP22_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Yaris Verso (_P2_) and other TOYOTA models
Alternative products

Wire brush
WD-40 spray
Copper grease
Sealant
Drive socket # 12
Wheel impact socket #21
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Wheel chock
Replacement: wheel bearing – TOYOTA YARIS VERSO (_NLP2_, _NCP2_). Tip from AUTODOC experts:
- Do not re-use the bearing assembly of your TOYOTA YARIS VERSO (_NLP2_, _NCP2_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- All work should be done with the engine stopped.
Replacement: wheel bearing – TOYOTA YARIS VERSO (_NLP2_, _NCP2_). Use the following procedure:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. TOYOTA YARIS VERSO (_NLP2_, _NCP2_) - Step 5
Remove the wheel. - Step 6Clean the brake drum. Use a wire brush. Use WD-40 spray.Step 7
Remove the brake drum.Replacement: wheel bearing – TOYOTA YARIS VERSO (_NLP2_, _NCP2_). Tip:Examine the brake drum. Replace it if necessary. - Step 8Clean the fasteners of the wheel hub bearing. Use WD-40 spray. Use a wire brush.Step 9
Unscrew the hub bearing mounting. Use a drive socket #12. Use a tap wrench. Use a ratchet wrench. - Step 10
Remove the fastening bolts (4 pieces). - Step 11
Remove the hub and the bearing together, since they are a sealed unit. Use a hammer. - Step 12
Treat the fastening bolts. Use a sealant. - Step 13Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.Step 14
Install the new wheel hub with a bearing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Yaris Verso (P2) model
Popular maintenance tutorials for Toyota Yaris Verso
Complete guides for changing the Wheel bearings on different TOYOTA YARIS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Yaris Verso (_P2_)
View more
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
#DIY guide: Changing your car's color with a spray can | AUTODOC tips
Top 7 signs of a bad starter
How to Make a DIY Foam Sprayer | AUTODOC tips
Most commonly replaced car parts on TOYOTA YARIS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























