How to carry out replacement: Shock Absorber 2.0 HDI Peugeot 406 Estate
Disclaimer
Change Peugeot 406 Estate 2.0 16V Shock Absorber yourself – manuals and video tutorials

How to change rear shock absorbers on PEUGEOT 406 Estate – replacement guide

downloads: 4
Views: 38
Download your free tutorial and fix PEUGEOT 406 Break (8E/F) 2.0 HDI problems yourself Download for free 1.94 MB Shock Absorber for Peugeot 406 Estate Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
PEUGEOT 406 Break (8E/F) 1.9 D, PEUGEOT 406 Break (8E/F) 1.8 16V, PEUGEOT 406 Break (8E/F) 1.9 TD, PEUGEOT 406 Break (8E/F) 2.1 TD 12V, PEUGEOT 406 Break (8E/F) 2.0 Turbo, PEUGEOT 406 Break (8E/F) 2.0 16V, PEUGEOT 406 Break (8E/F) 3.0 24V, PEUGEOT 406 Break (8E/F) 1.8, PEUGEOT 406 Break (8E/F) 2.0 HDI, PEUGEOT 406 Break (8E/F) 2.0 HDI, PEUGEOT 406 Break (8E/F) 2.0 16V, PEUGEOT 406 Break (8E/F) 3.0 V6, PEUGEOT 406 Break (8E/F) 2.2, PEUGEOT 406 Break (8E/F) 1.8 16V, PEUGEOT 406 Break (8E/F) 2.0 16V, PEUGEOT 406 Break (8E/F) 2.2 HDI, PEUGEOT 406 Break (8E/F) 2.0 16V HPi, PEUGEOT 406 Break (8E/F) 2.0 HDi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for 406 Break (8E/F) and other PEUGEOT models
Alternative products
How to change Shock absorber on Peugeot 406 Estate 2.0 HDI – step-by-step instructions for straightforward car repair Shock absorber
Tools
Replacement: shock absorbers – PEUGEOT 406 Break (8E/F). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
High-temperature ceramic grease
Drive socket # 15
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Flat Screwdriver
Clip removal tool
Adjustable wrench
Hydraulic transmission jack
Rubber mallet
Wheel chock
Buy tools
Replacement: shock absorbers – PEUGEOT 406 Break (8E/F). AUTODOC experts recommend:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • Please note: all work on the car – PEUGEOT 406 Break (8E/F) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Shock Absorber on Peugeot 406 Estate 1996 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace PEUGEOT 406 Break (8E/F) 2.0 HDI 1997 Shock Absorber - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 3
    Peugeot 406 Estate 2.0 16V 1998 Shock Absorber replacement: free workshop manuals
    Raise the rear of the car and secure on supports.
  4. Step 4
    Changing Shock Absorber on PEUGEOT 406 Break (8E/F) 2.2 1999 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. PEUGEOT 406 Break (8E/F)
  5. Step 5
    How to remove PEUGEOT 406 2.2 HDI 2000 Shock Absorber - online easy-to-follow instructions
    Remove the wheel.
  6. Step 6
    How to replace Shock Absorber on PEUGEOT 406 Break (8E/F) 2001: download PDF manuals and video instructions
    Support the rear control arm. Use a hydraulic transmission jack.
  7. Step 7
    How hard is it to do yourself: Shock Absorber replacement on Peugeot 406 Estate 3.0 V6 2002 - download illustrated guide
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 8
    Need to know how to renew Shock Absorber on PEUGEOT 406 2003? This free workshop manual will help you to do it yourself
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench.
  9. Step 9
    Changing of Shock Absorber on Peugeot 406 Estate 2004 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolt.
  10. Step 10
    PEUGEOT 406 2.0 16V Shock Absorber replacement: online guides and video tutorials
    Remove the support from under the rear control arm.
    AUTODOC recommends:
    Replacement: shock absorbers – PEUGEOT 406 Break (8E/F). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
  11. Step 11
    Lower the car.
    Step 12
    Open the luggage compartment.
    Step 13
    Replacing Shock Absorber on Peugeot 406 Estate 1997 2.0 HDI by yourself
    Remove the clips of the boot side lining. Use a clip removal tool.
  12. Step 14
    406 Break (8E/F) 2.2 HDI 1998 Shock Absorber DIY replacement workshop manual
    Detach the boot side lining.
  13. Step 15
    Clean the upper fastener of the shock absorber. Use a wire brush. Use WD-40 spray.
    Step 16
    How to change Shock Absorber on PEUGEOT 406 Break (8E/F) 1999 - tips and tricks
    Unscrew the upper fastener of the shock absorber. Use a combination spanner #17. Use an adjustable wrench.
    AUTODOC recommends:
    PEUGEOT 406 Break (8E/F) – To avoid injury, hold the shock absorber while unscrewing the fastening bolts.
  14. Step 17
    Step-by-step recommendations for DIY replacement Peugeot 406 Estate 2000 2.2 HDI Shock Absorber
    Remove the shock absorber.
  15. Step 18
    DIY replacement of Shock Absorber on PEUGEOT 406 Break (8E/F) 1.8 16V 2001 is not an issue anymore with our step-by-step tutorial
    Remove the shock absorber upper mount.
  16. Step 19
    How to change Shock Absorber on Peugeot 406 Estate 1996 - free PDF and video manuals
    Remove the shock absorber dust cap and the bump stop.
    AUTODOC recommends:
    Replacement: shock absorbers – PEUGEOT 406 Break (8E/F). Carefully inspect the mount, the boot, and the bump stop of the shock absorber. Replace if necessary.
  17. Step 20
    How to replace PEUGEOT 406 Break (8E/F) 2.0 HDI 1997 Shock Absorber - step-by-step manuals and video guides
    Install the dust boot and the bump stop on the new shock absorber.
    Replacement: shock absorbers – PEUGEOT 406 Break (8E/F). AUTODOC experts recommend:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  18. Step 21
    Peugeot 406 Estate 2.0 16V 1998 Shock Absorber replacement: free workshop manuals
    Install the top mount on the new shock absorber and fasten it.
  19. Step 22
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
    Step 23
    Changing Shock Absorber on PEUGEOT 406 Break (8E/F) 2.2 1999 by yourself
    Place the shock absorber in the wheel arch and fasten it.
    AUTODOC recommends:
    PEUGEOT 406 Break (8E/F) – To avoid injury, hold the shock absorber while screwing in the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 406 Estate model

Peugeot 406 Estate tyre size

Popular maintenance tutorials for Peugeot 406 Estate

More manuals for Peugeot 406 Estate

Complete guides for changing the Shock absorbers on different PEUGEOT 406 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY PEUGEOT 406 Break (8E/F) Shock Absorber replacement - online guide
Tips & tricks for your PEUGEOT 406 Break (8E/F)
View more
  • How to change Shock absorbers on PEUGEOT 406 Break (8E/F) 1.8 16V - replacement tricks
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
    6K views
    Published on: 05/02/2024
  • Changing Shocks Peugeot 406 Estate 2.0 HDI - Replacement Tips
    Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide
    3K views
    Published on: 23/03/2023
  • Maintenance Hacks - PEUGEOT 406 Break (8E/F) 2.0 16V Struts replacement guide
    How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
    4K views
    Published on: 04/07/2021
  • Replace Struts and shocks on Peugeot 406 Estate - free video tips
    How to Make a DIY Foam Sprayer | AUTODOC tips
    351K views
    Published on: 23/06/2022

Most commonly replaced car parts on PEUGEOT 406

Professional manuals for the most common PEUGEOT models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
PEUGEOT 406 Break (8E/F) Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME