When to replace the Lambda Sensor on your PEUGEOT 2008
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
PEUGEOT 2008 Estate (CU_) 1.6 VTi, PEUGEOT 2008 Estate (CU_) 1.6 VTi View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: lambda sensor – PEUGEOT 2008. Tools you might need:
Wire brush
WD-40 spray
Electronic spray
Copper grease
Torque wrench
Combination spanner #22
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – PEUGEOT 2008. AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – PEUGEOT 2008 – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Lambda Sensor on Peugeot 2008 Estate 2013 - free PDF and video manuals
    Detach the oxygen sensor connector.
  2. Step 4
    How to replace PEUGEOT 2008 Estate (CU_) 1.6 HDi 2014 Lambda Sensor - step-by-step manuals and video guides
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  3. Step 5
    Peugeot 2008 Estate 1.6 BlueHDi 100 2015 Lambda Sensor replacement: free workshop manuals
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  4. Step 6
    Changing Lambda Sensor on PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 120 2016 by yourself
    Remove the oxygen sensor.
  5. Step 7
    How to remove PEUGEOT 2008 1.2 THP 110 / PureTech 110 2017 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor mounting seat. Use WD-40 spray.
  6. Step 8
    How to replace Lambda Sensor on PEUGEOT 2008 Estate (CU_) 2018: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 2008 Estate (CU_) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 2008 Estate (CU_) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY PEUGEOT 2008 Estate (CU_) Lambda Sensor replacement - online guide
Tips & tricks for your PEUGEOT 2008 Estate (CU_)
View more
  • How to change Oxygen sensor on PEUGEOT 2008 Estate (CU_) 1.2 VTi - replacement tricks
    3 essential tips for choosing summer tyres | Get ready for warmer weather
  • Changing O2 sensor Peugeot 2008 Estate 1.6 HDi - Replacement Tips
    Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
  • Maintenance Hacks - PEUGEOT 2008 Estate (CU_) 1.6 BlueHDi 100 NOx sensor replacement guide
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
  • Replace Lambda sensors on Peugeot 2008 Estate - free video tips
    Prevent Breakdowns: Key Car Checks After Winter | AUTODOC Guide