Important!

This replacement procedure can be used for:
PEUGEOT 206 Hatchback (2A/C) 1.6 16V, PEUGEOT 206 CC (2D) 1.6 16V, PEUGEOT 206 SW (2E/K) 1.6 16V, PEUGEOT 1007 (KM_) 1.6 16V, PEUGEOT 206 Saloon 1.6 16V

The steps may slightly vary depending on the car design.

How to change front anti roll bar link / front drop link on PEUGEOT 206 1 (2D) [TUTORIAL AUTODOC]

Replacement: anti roll bar links – Peugeot 206 CC 2D. Tools you'll need:

                        Wire brush
                      
                        WD-40 spray
                      
                        Brake cleaner 
                      
                        Copper grease 
                      
                        Combination spanner #17
                      
                        Torx bit T30
                      
                        Wheel impact socket #19
                      
                        Ratchet wrench
                      
                        Torque wrench
                      
                        Wheel chock

All the parts you need to replace – Anti Roll Bar Links for 206 CC (2D) and other PEUGEOT models

 
    PEUGEOT 206 CC (2D) 1.6 16V
  
    PEUGEOT 206 Hatchback (2A/C) 1.6 16V
  
    PEUGEOT 206 SW (2E/K) 1.6 16V
  
    PEUGEOT 1007 (KM_) 1.6 16V

 
    PEUGEOT 206 CC (2D) 1.6 16V
  
    PEUGEOT 206 Hatchback (2A/C) 1.6 16V
  
    PEUGEOT 206 SW (2E/K) 1.6 16V
  
    PEUGEOT 1007 (KM_) 1.6 16V
  
    PEUGEOT 206 Saloon 1.6 16V

 
    PEUGEOT 206 CC (2D) 1.6 16V
  
    PEUGEOT 206 Hatchback (2A/C) 1.6 16V
  
    PEUGEOT 206 Saloon 1.6 16V

AUTODOC recommends:

Replace the stabiliser links on Peugeot 206 CC 2D in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
All work should be done with the engine stopped.

Replacement: anti roll bar links – Peugeot 206 CC 2D. Recommended sequence of steps:

Step 1

Secure the wheels with chocks.
Step 2

Loosen the wheel mounting bolts.Use wheel impact socket #19.
Step 3

Raise the front of the car and secure on supports.
Step 4

Unscrew the wheel bolts.

AUTODOC recommends:

Important! Hold the wheel while unscrewing the fastening bolts. Peugeot 206 CC 2D
Step 5

Remove the wheel.
Step 6

Clean the stabiliser link fasteners.Use a wire brush.Use WD-40 spray.
Step 7

Unscrew the fastener connecting the stabilizer link to the stabilizer bar.Use a combination spanner #17.Use Torx T30.Use a ratchet wrench.
Step 8

Unscrew the fastener connecting the stabilizer link to the shock strut.Use a combination spanner #17.Use Torx T30.Use a ratchet wrench.
Step 9

Remove the stabilizer rod.

Replacement: anti roll bar links – Peugeot 206 CC 2D. AUTODOC experts recommend:

Examine stabiliser bushes. Replace them if needed.
Step 10

Install a new rod, tighten the fasteners.
Step 11

Tighten the fastener connecting the stabilizer link to the shock strut.Use a combination spanner #17.Use Torx T30.Use a torque wrench.Tighten it to 60 Nm torque.
Step 12

Tighten the fastener connecting the stabilizer link to the stabilizer bar.Use a combination spanner #17.Use Torx T30.Use a torque wrench.Tighten it to 60 Nm torque.
Step 13

Treat all joints of the stabiliser link.Use copper grease.
Step 14

Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 15

Clean the brake disk surface.Use a brake cleaner.

AUTODOC recommends:

Replacement: anti roll bar links – Peugeot 206 CC 2D. After applying the spray, wait a few minutes.
Step 16

Install the wheel.

AUTODOC recommends:

Peugeot 206 CC 2D – To avoid injury, hold the shock absorber while screwing in the fastening bolts.
Step 17

Screw in the wheel bolts.Use wheel impact socket #19.
Step 18

Lower the car and working in a cross order, tighten the wheel bolts.Use a torque wrench.Tighten it to 120 Nm torque.
Step 19

Remove the jacks and chocks.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Tips & tricks for your PEUGEOT 206 CC (2D)

How to remove a broken bolt without welding | AUTODOC tips

260K views

Published on: 11/03/2020
Noise from under the hood | AUTODOC TIPS

198K views

Published on: 25/08/2019
How to fix a knocking and creaking suspension | AUTODOC

181K views

Published on: 08/09/2019
6 SIGNS OF A BAD FUEL FILTER | AUTODOC

163K views

Published on: 24/07/2019