Disclaimer
How to change front anti roll bar links on PEUGEOT 206 Hatchback (2A/C) – replacement guide
downloads:
4
Views:
75
Important!
This replacement procedure can be used for:
PEUGEOT 206 Hatchback (2A/C) 1.1 i, PEUGEOT 206 Hatchback (2A/C) 1.4 i, PEUGEOT 206 Hatchback (2A/C) 1.6 i, PEUGEOT 206 Hatchback (2A/C) 1.9 D, PEUGEOT 206 Hatchback (2A/C) 1.4 LPG, PEUGEOT 206 Hatchback (2A/C) 2.0 S16, PEUGEOT 206 Hatchback (2A/C) 2.0 HDI, PEUGEOT 206 Hatchback (2A/C) 2.0 S16, PEUGEOT 206 Hatchback (2A/C) 1.6 16V, PEUGEOT 206 Hatchback (2A/C) 1.4 HDi eco, PEUGEOT 206 Hatchback (2A/C) 2.0 RC, PEUGEOT 206 Hatchback (2A/C) 1.4 16V, PEUGEOT 206 Hatchback (2A/C) 1.6 HDi, PEUGEOT 206 Hatchback (2A/C) 1.1, PEUGEOT 206 Hatchback (2A/C) 1.4 HDi, PEUGEOT 206 Hatchback (2A/C) 1.6 BiFuel … View more
The steps may slightly vary depending on the car design.
PEUGEOT 206 Hatchback (2A/C) 1.1 i, PEUGEOT 206 Hatchback (2A/C) 1.4 i, PEUGEOT 206 Hatchback (2A/C) 1.6 i, PEUGEOT 206 Hatchback (2A/C) 1.9 D, PEUGEOT 206 Hatchback (2A/C) 1.4 LPG, PEUGEOT 206 Hatchback (2A/C) 2.0 S16, PEUGEOT 206 Hatchback (2A/C) 2.0 HDI, PEUGEOT 206 Hatchback (2A/C) 2.0 S16, PEUGEOT 206 Hatchback (2A/C) 1.6 16V, PEUGEOT 206 Hatchback (2A/C) 1.4 HDi eco, PEUGEOT 206 Hatchback (2A/C) 2.0 RC, PEUGEOT 206 Hatchback (2A/C) 1.4 16V, PEUGEOT 206 Hatchback (2A/C) 1.6 HDi, PEUGEOT 206 Hatchback (2A/C) 1.1, PEUGEOT 206 Hatchback (2A/C) 1.4 HDi, PEUGEOT 206 Hatchback (2A/C) 1.6 BiFuel … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for 206 Hatchback (2A/C) and other PEUGEOT models
Alternative products

Wire brush
WD-40 spray
Copper grease
Drive socket # 16
Wheel impact socket #17
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on PEUGEOT 206 Hatchback (2A/C) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – PEUGEOT 206 Hatchback (2A/C). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. PEUGEOT 206 Hatchback (2A/C) - Step 5
Remove the wheel. - Step 6.1
Clean the stabiliser link fasteners. Use a wire brush.Step 6.2
Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #16. - Step 8
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a drive socket #16. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – PEUGEOT 206 Hatchback (2A/C). Tip from AUTODOC experts:Examine stabiliser bushes. Replace them if needed. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 206 Hatchback (2A/C) model
Popular maintenance tutorials for Peugeot 206 Hatchback
Complete guides for changing the Drop links on different PEUGEOT 206 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 206 Hatchback (2A/C)
View more
How to get your motorcycle ready for spring
How to prevent car windows from fogging up | AUTODOC tips
Petrol or diesel: The engine showdown! | AUTODOC
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Most commonly replaced car parts on PEUGEOT 206
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























