How to carry out replacement: Lambda Sensor 2.5 TDI quattro Audi Allroad 4BH
Disclaimer
Change Audi Allroad 4BH 2.5 TDI quattro Lambda Sensor yourself – manuals and video tutorials

How to change lambda sensor on AUDI Allroad (4BH, C5) – replacement guide

downloads: 4
Views: 30
Download your free tutorial and fix AUDI Allroad (4BH, C5) 2.7 quattro problems yourself Download for free 983.04 KB Lambda Sensor for Audi Allroad 4BH Shop now
Leave a comment Open in a new tab
When to replace the Lambda Sensor on your AUDI ALLROAD
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
AUDI Allroad (4BH, C5) 2.7 T quattro, AUDI Allroad (4BH, C5) 4.2 V8 quattro … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Lambda Sensor for Allroad (4BH, C5) and other AUDI models
How to change Lambda sensor on Audi Allroad 4BH 2.5 TDI quattro – step-by-step instructions for straightforward car repair Lambda sensor
How to change Lambda sensor on Allroad C5 (4BH) – tips for proper car maintenance
Lambda sensor for Allroad C5 (4BH) Petrol (250 hp)
Simple DIY car repair steps – Replacing Lambda sensor on Allroad C5 (4BH)
Lambda sensor for Allroad C5 (4BH) Petrol (299 hp)
Tools
Replacement: lambda sensor – AUDI ALLROAD (4BH, C5). List of the tools you'll need:
Wire brush
WD-40 spray
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Thread tap
Ratchet wrench
Buy tools
Replacement: lambda sensor – AUDI ALLROAD (4BH, C5). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – AUDI ALLROAD (4BH, C5) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Step 2
    How to change Lambda Sensor on Audi Allroad 4BH 2000 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 3
    How to replace AUDI Allroad (4BH, C5) 2.5 TDI quattro 2001 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 4
    Audi Allroad 4BH 2.7 T quattro 2002 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 5
    Changing Lambda Sensor on AUDI Allroad (4BH, C5) 2.7 quattro 2003 by yourself
    Disconnect the oxygen sensor wiring.
  5. Step 6
    How to remove AUDI ALLROAD 2.5 TDI quattro 2004 Lambda Sensor - online easy-to-follow instructions
    Clean the oxygen sensor fastener. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Lambda Sensor on AUDI Allroad (4BH, C5) 2005: download PDF manuals and video instructions
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Lambda Sensor replacement on Audi Allroad 4BH 4.2 V8 quattro 2000 - download illustrated guide
    Remove the oxygen sensor.
  8. Step 9
    Need to know how to renew Lambda Sensor on AUDI ALLROAD 2001? This free workshop manual will help you to do it yourself
    Clean the thread to prepare it for installing a new oxygen sensor. Use a thread tap. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Allroad C5 (4BH) model.

Audi Allroad 4BH tyre size

Popular maintenance tutorials for Audi Allroad 4BH

More manuals for Audi Allroad 4BH

Complete guides for changing the Oxygen sensor on different AUDI ALLROAD models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI Allroad (4BH, C5) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI Allroad (4BH, C5) Lambda Sensor replacement - online guide
Tips & tricks for your AUDI Allroad (4BH, C5)
View more
  • How to change Oxygen sensor on AUDI Allroad (4BH, C5) 4.2 V8 quattro - replacement tricks
    Top 5 mistakes when replacing spark plugs | AUTODOC tips
    9K views
    Published on: 13/07/2023
  • Changing O2 sensor Audi Allroad 4BH 2.5 TDI quattro - Replacement Tips
    Top 5 tips to prevent car rust | AUTODOC tips
    5K views
    Published on: 27/07/2023
  • Maintenance Hacks - AUDI Allroad (4BH, C5) 2.7 T quattro NOx sensor replacement guide
    5 car interior cleaning mistakes | AUTODOC tips
    6K views
    Published on: 26/05/2022
  • Replace Lambda sensors on Audi Allroad 4BH - free video tips
    How to save when buying car parts
    2K views
    Published on: 03/02/2022

Most commonly replaced car parts on AUDI ALLROAD

Professional manuals for the most common AUDI models