Recommended replacement interval for the part category Wiper Blade : 12month
Important!
This replacement procedure can be used for:
AUDI Allroad (4BH, C5) 2.7 quattro,
AUDI Allroad (4BH, C5) 2.5 TDI quattro,
AUDI Allroad (4BH, C5) 2.7 T quattro
…
View more
The steps may slightly vary depending on the car design.
Similar video tutorial
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wiper Blades for Allroad (4BH, C5) and other AUDI models
When replacing the wiper blade, take caution to prevent the spring-loaded wiper arm from hitting the glass.
Step 6
Install the new wiper blade and carefully press the wiper arm down to the glass.
Replacement: windshield wipers – AUDI ALLROAD (4BH, C5). Tip:
Don't touch the wiper blade at the working rubber edge to prevent damage to the graphite coating. Ensure that the blade rubber strip fits tightly to the glass along the entire length.
Step 7
Switch on the ignition.Return the windscreen wipers from the service position.
Step 8
After installation check the wipers performance. The blades shouldn't intersect or bump against the windshield seal.
Step 9
Switch off the ignition.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your AUDI Allroad (4BH, C5)
View more
5 common car washing mistakes | AUTODOC
How to replace a wheel stud | AUTODOC tips
How to change an oxygen sensor | AUTODOC tips
What to do if your check engine light is on | AUTODOC tips