When to replace the Lambda Sensor on your AUDI Q5
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro, AUDI Q5 (8RB) 2.0 TFSI quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: lambda sensor – AUDI Q5 (8R). Tools you might need:
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – AUDI Q5 (8R). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – AUDI Q5 (8R) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on Audi Q5 8RB 2008 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 5
    How to replace AUDI Q5 (8RB) 2.0 TDI quattro 2009 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 6
    Audi Q5 8RB 3.0 TDI quattro 2010 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 7
    Changing Lambda Sensor on AUDI Q5 (8RB) SQ5 3.0 TDI quattro 2011 by yourself
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  5. Step 8
    How to remove AUDI Q5 2.0 TDI 2012 Lambda Sensor - online easy-to-follow instructions
    Remove the oxygen sensor.
  6. Step 9
    How to replace Lambda Sensor on AUDI Q5 (8RB) 2013: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  7. Step 10
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 11
    How hard is it to do yourself: Lambda Sensor replacement on Audi Q5 8RB 3.0 TDI quattro 2014 - download illustrated guide
    Install the new oxygen sensor.
  8. Step 12
    Need to know how to renew Lambda Sensor on AUDI Q5 2015? This free workshop manual will help you to do it yourself
    Tighten the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a torque wrench. Tighten it to 37 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI Q5 (8RB) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI Q5 (8RB) Lambda Sensor replacement - online guide
Tips & tricks for your AUDI Q5 (8RB)
View more
  • How to change Oxygen sensor on AUDI Q5 (8RB) 2.0 TFSI quattro - replacement tricks
    DIY jack restoration | AUTODOC tips
  • Changing O2 sensor Audi Q5 8RB 2.0 TDI quattro - Replacement Tips
    What causes engine misfire? | AUTODOC
  • Maintenance Hacks - AUDI Q5 (8RB) 3.0 TDI quattro NOx sensor replacement guide
    #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
  • Replace Lambda sensors on Audi Q5 8RB - free video tips
    Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips

Professional manuals for the most common AUDI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI Q5 (8RB) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME