Disclaimer
How to change headlights on TOYOTA Vios / Yaris II Saloon (XP9) – replacement guide
downloads:
6
Views:
197
Important!
This replacement procedure can be used for:
TOYOTA Yaris / Vios Saloon (_P9_) 1.0 (KSP92_) … View more
The steps may slightly vary depending on the car design.
TOYOTA Yaris / Vios Saloon (_P9_) 1.0 (KSP92_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Headlights for Yaris / Vios Saloon (_P9_) and other TOYOTA models
Alternative products

Electronic spray
Drive socket # 10
Clip removal tool
Ratchet wrench
Phillips screwdriver
Painter's tape
Replacement: headlights – TOYOTA VIOS/YARIS Saloon (ZSP9_, NCP9_). Tip from AUTODOC:
- The replacement procedure is identical for the right and left headlight.
- Please note: all work on the car – TOYOTA VIOS/YARIS Saloon (ZSP9_, NCP9_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Lift the car using a jack or place it over an inspection pit.Step 3
Unscrew the lower fasteners of the bumper. Use a drive socket #10. Use a ratchet wrench. - Step 4
Remove the side bumper retainer clips. Use a Phillips screwdriver. Use a clip removal tool. - Step 5
Detach the lockers at the points where they are fastened to the bumper. - Step 6Lower the car.Step 7
Remove the upper bumper retainer clips. Use a clip removal tool. - Step 8
Stick painter's tape to the car fenders to protect the paintwork from damage when demounting the bumper. - Step 9
Release the side clips of the bumper. - Step 10Carefully release the bumper from the fasteners.Step 11
Remove the bumper.AUTODOC recommends:Replacement: headlights – TOYOTA VIOS/YARIS Saloon (ZSP9_, NCP9_). To avoid damaging the part when removing it, do not use excessive force. - Step 12
Unscrew the headlight fasteners. Use a drive socket #10. Use a ratchet wrench. - Step 13
Unplug the connectors of the headlight bulbs. - Step 14
Remove the headlight.AUTODOC recommends:Replacement: headlights – TOYOTA VIOS/YARIS Saloon (ZSP9_, NCP9_). Do not use excessive force when removing the part as this may damage it. - Step 15
Remove the bulbs from the old headlight and install them on the new one. - Step 16
Treat the connectors of the headlights. Use electronic spray. - Step 17
Plug in the connectors of the headlight bulbs. - Step 18
Install the new headlight.AUTODOC recommends:Replacement: headlights – TOYOTA VIOS/YARIS Saloon (ZSP9_, NCP9_). To avoid damaging the part during installation, do not use excessive force. - Step 19
Screw in the headlight fasteners. Use a drive socket #10. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Vios / Yaris II Saloon (XP9) model
Popular maintenance tutorials for TOYOTA VIOS/YARIS Saloon (ZSP9_, NCP9_)
Complete guides for changing the Headlight on different TOYOTA YARIS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Yaris / Vios Saloon (_P9_)
View more
DIY manual gearbox restoration | Drivetrain restoration – Part 3
Revitalize Your Car Interior: DIY Steering Wheel Cover with AUTODOC Tips
Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
K2 ROTON wheel cleaner overview
Most commonly replaced car parts on TOYOTA YARIS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





















