How to carry out replacement: Wheel Bearing 2.2 CRDi 4WD Hyundai Santa FE DM
Disclaimer
Change Hyundai Santa FE DM 2.2 CRDi Wheel Bearing yourself – manuals and video tutorials

How to change front wheel bearing on HYUNDAI Santa Fé III (DM) – replacement guide

downloads: 5
Views: 100
Download your free tutorial and fix HYUNDAI Santa Fé III (DM) 2.2 CRDi 4WD problems yourself Download for free 2.09 MB Wheel Bearing for Hyundai Santa FE DM Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
HYUNDAI Santa Fé III (DM) 2.4, HYUNDAI Santa Fé III (DM) 2.0 CRDi, HYUNDAI Santa Fé III (DM) 2.2 CRDi, HYUNDAI Santa Fé III (DM) 2.2 CRDi 4WD, HYUNDAI Santa Fé III (DM) 2.4 4WD, HYUNDAI Santa Fé III (DM) 2.0 CRDi 4WD, HYUNDAI Santa Fé III (DM) 2.4 GDI 4WD, HYUNDAI Santa Fé III (DM) 2.4 CCVT, HYUNDAI Santa Fé III (DM) 2.4 CCVT AWD, HYUNDAI Santa Fé III (DM) 2.0 CRDi 4WD, HYUNDAI Santa Fé III (DM) 2.4 CCVT AWD … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Santa Fé III (DM) and other HYUNDAI models
Alternative products
How to change Wheel bearing kit on Hyundai Santa FE DM 2.2 CRDi 4WD – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – HYUNDAI SANTA FÉ III (DM). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
All-purpose cleaning spray
Copper grease
Torque wrench
Combination spanner #18
Drive socket # 14
Drive socket # 17
Drive socket # 18
Drive socket # 32
Wheel impact socket #21
Ratchet wrench
Phillips screwdriver
Hammer
Pin punch
Nippers
Pliers
Crow bar
Wheel chock
Buy tools
AUTODOC recommends:
  • Do not re-use the bearing assembly of your HYUNDAI SANTA FÉ III (DM) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • Please note: all work on the car – HYUNDAI SANTA FÉ III (DM) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    How to change Wheel Bearing on Hyundai Santa FE DM 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace HYUNDAI Santa Fé III (DM) 2.2 CRDi 4WD 2013 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  3. Step 3
    Raise the front of the car and secure on supports.
    Step 4
    Hyundai Santa FE DM 2.2 CRDi 2014 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. HYUNDAI SANTA FÉ III (DM)
  4. Step 5
    Changing Wheel Bearing on HYUNDAI Santa Fé III (DM) 2.0 CRDi 4WD 2015 by yourself
    Remove the wheel.
  5. Step 6
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove HYUNDAI SANTA FE 2.4 GDI 2016 Wheel Bearing - online easy-to-follow instructions
    Unscrew the caliper bracket fastening. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench.
  6. Step 8
    How to replace Wheel Bearing on HYUNDAI Santa Fé III (DM) 2017: download PDF manuals and video instructions
    Remove the brake caliper together with its bracket.
    Replacement: wheel bearing – HYUNDAI SANTA FÉ III (DM). AUTODOC experts recommend:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  7. Step 9
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
    Step 10
    How hard is it to do yourself: Wheel Bearing replacement on Hyundai Santa FE DM 2.4 4WD 2018 - download illustrated guide
    Unscrew the brake disc mounting bolts and remove it. Use a Phillips screwdriver.
  8. Step 11
    Need to know how to renew Wheel Bearing on HYUNDAI SANTA FE 2012? This free workshop manual will help you to do it yourself
    Remove the cotter pin securing the hub nut. Use nippers.
  9. Step 12
    Changing of Wheel Bearing on Hyundai Santa FE DM 2013 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the hub nut. Use a drive socket #32. Use a ratchet wrench.
  10. Step 13
    HYUNDAI SANTA FE 2.2 CRDi Wheel Bearing replacement: online guides and video tutorials
    Remove the fastening nut.
  11. Step 14
    Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray.
    Step 15
    Replacing Wheel Bearing on Hyundai Santa FE DM 2015 2.2 CRDi 4WD by yourself
    Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #19. Use a drive socket #18. Use a ratchet wrench.
  12. Step 16
    Santa Fé III (DM) 2.4 GDI 2016 Wheel Bearing DIY replacement workshop manual
    Remove the fastening bolt. Use a hammer. Use a pin punch.
  13. Step 17
    Disconnect the ball joint from the steering knuckle.
    Step 18.1
    How to change Wheel Bearing on HYUNDAI Santa Fé III (DM) 2017 - tips and tricks
    Unscrew the fastener that connects the wheel hub bearing to the steering knuckle.
    Step 18.2
    Step-by-step recommendations for DIY replacement Hyundai Santa FE DM 2018 2.4 GDI Wheel Bearing
    Use a drive socket #14. Use a ratchet wrench.
  14. Step 19
    Remove the fastening bolts.
    Step 20
    Detach the driveshaft from the steering knuckle. Use a hammer.
    Step 21
    DIY replacement of Wheel Bearing on HYUNDAI Santa Fé III (DM) 2.0 CRDi 2012 is not an issue anymore with our step-by-step tutorial
    Remove the hub and the bearing together, since they are a sealed unit.
  15. Step 22
    Clean the wheel hub mounting seat. Use all-purpose cleaning spray.
    Step 23
    How to change Wheel Bearing on Hyundai Santa FE DM 2012 - free PDF and video manuals
    Install the new wheel hub together with the bearing.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the HYUNDAI Santa Fé III (DM) model

Hyundai Santa FE DM tyre size

Popular maintenance tutorials for Hyundai Santa FE DM

More manuals for Hyundai Santa FE DM

Complete guides for changing the Wheel bearings on different HYUNDAI SANTA FE models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY HYUNDAI Santa Fé III (DM) Wheel Bearing replacement - online guide
Tips & tricks for your HYUNDAI Santa Fé III (DM)
View more
  • How to change Wheel bearings on HYUNDAI Santa Fé III (DM) 2.0 CRDi - replacement tricks
    5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
    6K views
    Published on: 05/02/2024
  • Changing Hub bearing Hyundai Santa FE DM 2.2 CRDi 4WD - Replacement Tips
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
    4K views
    Published on: 31/01/2023
  • Maintenance Hacks - HYUNDAI Santa Fé III (DM) 2.2 CRDi Wheel bearing kit replacement guide
    5 mistakes when replacing consumables
    5K views
    Published on: 06/02/2025
  • Replace Wheel hub bearing on Hyundai Santa FE DM - free video tips
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
    7K views
    Published on: 20/05/2021

Most commonly replaced car parts on HYUNDAI SANTA FE

Professional manuals for the most common HYUNDAI models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
HYUNDAI Santa Fé III (DM) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME