Disclaimer
How to change front brake discs on RENAULT Scénic I (JA0/1_, FA0_) – replacement guide
downloads:
2
Views:
24
Recommended replacement interval for the part category Brake disc : 50000 km
Important!
This replacement procedure can be used for:
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A), RENAULT Scénic I (JA0/1_, FA0_) 1.6, RENAULT Scénic I (JA0/1_, FA0_) 1.8 4x4, RENAULT Scénic I (JA0/1_, FA0_) 1.9 D (JA0J, FA0J), RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00), RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel, RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel (JA04), RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00, JA16, JA15, JA19, JA1V, JA2B, JA2C, JA0B,... … View more
The steps may slightly vary depending on the car design.
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A), RENAULT Scénic I (JA0/1_, FA0_) 1.6, RENAULT Scénic I (JA0/1_, FA0_) 1.8 4x4, RENAULT Scénic I (JA0/1_, FA0_) 1.9 D (JA0J, FA0J), RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00), RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel, RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel (JA04), RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00, JA16, JA15, JA19, JA1V, JA2B, JA2C, JA0B,... … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Discs for Scénic I (JA0/1_, FA0_) and other RENAULT models
Alternative products

Wire brush
Nylon cleaning brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #17
Drive socket # 13
Drive socket # 18
Wheel impact socket #19
Torx bit T40
Ratchet wrench
Crow bar
Brake caliper wind back tool
Wheel chock
AUTODOC recommends:
- Replace the brake disks on the car RENAULT SCÉNIC I (JA0/1_) in complete set for each axis. Regardless of the state of components. This will ensure even braking.
- The replacement procedure is identical for both brake disks on the same axle.
- When changing the brake discs, always replace the brake pads.
- Please note: all work on the car – RENAULT SCÉNIC I (JA0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet. Unscrew the brake fluid reservoir cap.Step 2Secure the wheels with chocks.Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 4Raise the car.Replacement: brake discs – RENAULT SCÉNIC I (JA0/1_). Professionals recommend:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 5
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT SCÉNIC I (JA0/1_) - Step 6
Remove the wheel. - Step 7
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray. - Step 8
Unscrew the brake caliper fastening. Use a combination spanner #17. Use a drive socket #13. Use a ratchet wrench. - Step 9
Remove the brake caliper.AUTODOC recommends:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. - Step 10
Remove the brake pads. Use a crowbar. - Step 11
Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray. - Step 12
Unscrew the caliper bracket fastening. Use a drive socket #18. Use a ratchet wrench. - Step 13
Remove the caliper bracket. - Step 14
Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray. - Step 15
Unscrew the brake disc fastening. Use Torx T40. Use a ratchet wrench. - Step 16
Remove the brake disc. - Step 17
Clean the hub. Use a wire brush. - Step 18
Treat the contacting surface. Use copper grease. - Step 19
Install the brake disc. - Step 20
Tighten the brake disc fastening. Use Torx T40. Use a torque wrench. Tighten it to 14 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Scénic I (JA0/1, FA0) model
Popular maintenance tutorials for Renault Scenic 1
Complete guides for changing the Brake rotors on different RENAULT SCÉNIC models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Scénic I (JA0/1_, FA0_)
View more
Top 5 reasons why your car squeals | AUTODOC Tips
Top 5 reasons why the suspension knocks | AUTODOC tips
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Top 7 signs of a bad starter
Most commonly replaced car parts on RENAULT SCÉNIC
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


































