When to replace the Poly V-Belt on your RENAULT SCÉNIC
Recommended replacement interval for the part category Serpentine belt : 5 year / 120000 km
Important!
This replacement procedure can be used for:
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V RX4, RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A), RENAULT Scénic I (JA0/1_, FA0_) 1.6, RENAULT Scénic I (JA0/1_, FA0_) 1.8 4x4, RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00), RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel (JA04), RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00, JA16, JA15, JA19, JA1V, JA2B, JA2C, JA0B,... View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Scénic I (JA0/1_, FA0_) and other RENAULT models
Alternative products
How to change Serpentine belt on Renault Scenic 1 1.9 dCi – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – RENAULT SCÉNIC I (JA0/1_). Tools you need:
Torque wrench
Combination spanner #13
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Phillips Screwdriver
Fender cover
Wheel chock
AUTODOC recommends:
  • Please note: all work on the car – RENAULT SCÉNIC I (JA0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Poly V-Belt on Renault Scenic 1 1999 - free PDF and video manuals
    Secure the wheels with chocks. Loosen the wheel mounting bolts. Use wheel impact socket #19.
  2. Step 4
    Raise the car.
    Replacement: serpentine belt – RENAULT SCÉNIC I (JA0/1_). Tip from AUTODOC:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 5
    How to replace RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi 2000 Poly V-Belt - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT SCÉNIC I (JA0/1_)
  3. Step 6
    Renault Scenic 1 1.6 (JA00, JA16, JA15, JA19, JA1V, JA2B, JA2C, JA0B,... 2001 Poly V-Belt replacement: free workshop manuals
    Remove the wheel.
  4. Step 7
    Changing Poly V-Belt on RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V 2002 by yourself
    Unscrew and remove the wheel arch cover fasteners. Use a Phillips screwdriver.
  5. Step 8
    How to remove RENAULT SCÉNIC 1.9 dTi 2003 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 9
    How to replace Poly V-Belt on RENAULT Scénic I (JA0/1_, FA0_) 1999: download PDF manuals and video instructions
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  7. Step 10
    How hard is it to do yourself: Poly V-Belt replacement on Renault Scenic 1 2.0 16V RX4 2000 - download illustrated guide
    Remove the V-ribbed belt.
    Replacement: serpentine belt – RENAULT SCÉNIC I (JA0/1_). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  8. Step 11
    Need to know how to renew Poly V-Belt on RENAULT SCÉNIC 2001? This free workshop manual will help you to do it yourself
    Install the V-ribbed belt.
    AUTODOC recommends:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  9. Step 12
    Changing of Poly V-Belt on Renault Scenic 1 2002 won't be an issue if you follow this illustrated step-by-step guide
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #13.
  10. Step 13
    RENAULT SCÉNIC 2.0 16V (JA1D, JA17) Poly V-Belt replacement: online guides and video tutorials
    Place the V-ribbed belt on the tensioner pulley. Return the tensioner pulley to its initial position.
  11. Step 14
    Replacing Poly V-Belt on Renault Scenic 1 1999 1.9 dCi by yourself
    Rotate the crankshaft several times to check whether the new V-ribbed belt is working correctly. Use a drive socket #18. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Scénic I (JA0/1, FA0) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT Scénic I (JA0/1_, FA0_) Poly V-Belt replacement - online guide
Tips & tricks for your RENAULT Scénic I (JA0/1_, FA0_)
View more
  • How to change Alternator belt on RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi RX4 - replacement tricks
    Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
  • Changing Auxiliary belt Renault Scenic 1 1.9 dCi - Replacement Tips
    DIY jack restoration | AUTODOC tips
  • Maintenance Hacks - RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00, JA16, JA15, JA19, JA1V, JA2B, JA2C, JA0B,... Poly V-belt replacement guide
    DIY engine block coffee table
  • Replace Drive belt on Renault Scenic 1 - free video tips
    Top 5 reasons why the suspension knocks | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT Scénic I (JA0/1_, FA0_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME