Disclaimer
How to change rear wheel bearing on RENAULT Scénic I (JA0/1_, FA0_) – replacement guide
downloads:
3
Views:
129
Important!
This replacement procedure can be used for:
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A) … View more
The steps may slightly vary depending on the car design.
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Scénic I (JA0/1_, FA0_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Drive socket # 30
Wheel impact socket #19
Rubber mallet
Tap wrench
Hammer
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT SCÉNIC I (JA0/1_). AUTODOC experts recommend:
- Do not re-use the bearing assembly of your RENAULT SCÉNIC I (JA0/1_) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – RENAULT SCÉNIC I (JA0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT SCÉNIC I (JA0/1_) - Step 5
Remove the wheel. - Step 6
Clean the brake drum. Use a wire brush. Use WD-40 spray. - Step 7
Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – RENAULT SCÉNIC I (JA0/1_). Professionals recommend:Some cars are not equipped with wheel hub caps. - Step 8
Unscrew the wheel hub axle nut. Use a drive socket #30. Use a tap wrench. - Step 9
Remove the brake drum assembled with the wheel hub bearing. - Step 10
Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Scénic I (JA0/1, FA0) model
Popular maintenance tutorials for Renault Scenic 1
Complete guides for changing the Wheel bearings on different RENAULT SCÉNIC models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Scénic I (JA0/1_, FA0_)
View more
Why does it burn oil? The main cause of oil consumption in EA888 Gen 1
How to inspect and troubleshoot your car heater when it’s not working
How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Most commonly replaced car parts on RENAULT SCÉNIC
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























