How to carry out replacement: Brake Discs 1.5 i-VTEC (GM6) City GM6
Disclaimer
Change City GM6 1.5 i-DTEC Brake Discs yourself – manuals and video tutorials

How to change front brake discs on HONDA City Saloon (GM4, GM5, GM6, GM9) – replacement guide

downloads: 22
Views: 165
Download your free tutorial and fix HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-VTEC (GM6) problems yourself Download for free 2 MB Brake Discs for City GM6 Shop now
Leave a comment Open in a new tab
When to replace the Brake Discs on your HONDA CITY
Recommended replacement interval for the part category Brake disc : 50000 km
Important!
This replacement procedure can be used for:
HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 Hybrid (GM4), HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-DTEC, HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-VTEC (GM6) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Brake Discs for City Saloon (GM4, GM5, GM6, GM9) and other HONDA models
Alternative products
How to change Brake disc on City GM6 1.5 i-VTEC (GM6) – step-by-step instructions for straightforward car repair Brake disc
Tools
Replacement: brake discs – HONDA CITY Saloon (GM6). Tools you need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Drive socket # 12
Drive socket # 19
Wheel impact socket #19
Brake caliper wind back tool
Ratchet wrench
Torque wrench
Impact screwdriver
Phillips screwdriver
Tap wrench
Crow bar
Wheel chock
Buy tools
Replacement: brake discs – HONDA CITY Saloon (GM6). Professionals recommend:
  • Replace the brake disks on the car HONDA CITY Saloon (GM6) in complete set for each axis. Regardless of the state of components. This will ensure even braking.
  • The replacement procedure is identical for both brake disks on the same axle.
  • When changing the brake discs, always replace the brake pads.
  • All work should be done with the engine stopped.
Replacement: brake discs – HONDA CITY Saloon (GM6). Take the following steps:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Brake Discs on City GM6 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-VTEC (GM6) 2013 Brake Discs - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 4
    Raise the front of the car and secure on supports.
    Step 5
    City GM6 1.5 i-DTEC 2014 Brake Discs replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. HONDA CITY Saloon (GM6)
  4. Step 6
    Changing Brake Discs on HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 Hybrid 4WD (GM5) 2015 by yourself
    Remove the wheel.
  5. Step 7
    How to remove HONDA CITY 1.5 (GM6) 2016 Brake Discs - online easy-to-follow instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Brake Discs on HONDA City Saloon (GM4, GM5, GM6, GM9) 2017: download PDF manuals and video instructions
    Spread the brake pads. Use a crowbar.
  7. Step 9
    How hard is it to do yourself: Brake Discs replacement on City GM6 1.5 Hybrid (GM7) 2018 - download illustrated guide
    Unscrew the brake caliper fastening. Use a drive socket #12. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Brake Discs on HONDA CITY 2019? This free workshop manual will help you to do it yourself
    Remove the brake caliper.
    Replacement: brake discs – HONDA CITY Saloon (GM6). AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
  9. Step 11
    Changing of Brake Discs on City GM6 2020 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads. Use a crowbar.
  10. Step 12
    HONDA CITY 1.5 i-DTEC Brake Discs replacement: online guides and video tutorials
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Brake Discs on City GM6 2022 1.5 i-VTEC (GM6) by yourself
    Unscrew the caliper bracket fastening. Use a drive socket #19. Use a tap wrench. Use a ratchet wrench.
  12. Step 14
    City Saloon (GM4, GM5, GM6, GM9) 1.5 (GM6) 2023 Brake Discs DIY replacement workshop manual
    Remove the caliper bracket.
  13. Step 15
    How to change Brake Discs on HONDA City Saloon (GM4, GM5, GM6, GM9) 2024 - tips and tricks
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement City GM6 2025 1.5 (GM6) Brake Discs
    Unscrew the brake disc fastening. Use a Phillips screwdriver. Use an impact screwdriver.
  15. Step 17
    DIY replacement of Brake Discs on HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 Hybrid (GM4) 2012 is not an issue anymore with our step-by-step tutorial
    Remove the brake disc.
  16. Step 18
    How to change Brake Discs on City GM6 2012 - free PDF and video manuals
    Clean the hub. Use a wire brush. Treat the contacting surface. Use copper grease.
  17. Step 19
    How to replace HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-VTEC (GM6) 2013 Brake Discs - step-by-step manuals and video guides
    Install the brake disc.
  18. Step 20
    City GM6 1.5 i-DTEC 2014 Brake Discs replacement: free workshop manuals
    Tighten the brake disc fastening. Use a Phillips screwdriver. Use a torque wrench. Tighten it to 9 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the HONDA City Saloon (GM4, GM5, GM6, GM9) model

City GM6 tyre size

Popular maintenance tutorials for City GM6

More manuals for City GM6

Complete guides for changing the Brake rotors on different HONDA CITY models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY HONDA City Saloon (GM4, GM5, GM6, GM9) Brake Discs replacement - online guide
Tips & tricks for your HONDA City Saloon (GM4, GM5, GM6, GM9)
View more
  • How to change Brake rotors on HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 Hybrid (GM4) - replacement tricks
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
    4K views
    Published on: 31/01/2023
  • Changing Brake disc City GM6 1.5 i-VTEC (GM6) - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
    19K views
    Published on: 19/08/2020
  • Maintenance Hacks - HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-DTEC Rotors replacement guide
    DIY jack restoration | AUTODOC tips
    24K views
    Published on: 22/09/2022
  • Replace Disc brakes on City GM6 - free video tips
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
    11K views
    Published on: 30/11/2023

Most commonly replaced car parts on HONDA CITY

Professional manuals for the most common HONDA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
HONDA City Saloon (GM4, GM5, GM6, GM9) Brake Discs replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME