Recommended replacement interval for the part category Brake Pad Set, disc brake : 30000 km

All the parts you need to replace – Brake Pads for CR-V III (RE) and other HONDA models

HONDA CR-V III (RE)

AUTODOC recommends

Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
Do not wash the brake elements with gasoline, diesel fuel or gasoline-based solvents.
Observe the safety procedures! when brake pads work, brake dust is formed. Therefore, do not use compressed air and do not inhale dust when cleaning the brake pads.

Carry out replacement in the following order:

Step 1

Tighten the parking brake lever.

Step 2

Place wedge blocks under the rear wheels.

Step 3

Loosen the wheel mounting bolts.
Step 4

Raise the front of the car and secure on supports.

Step 5

Remove the front wheels.
Step 6.1

Unscrew the brake caliper fastening

Step 6.2
Step 7.1

Remove the brake caliper.

Step 7.2

AutoDoc recommends:

Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Do not press the brake pedal after removing the brake pads. This will lead to the piston drop out of the brake cylinder, brake fluid leakage and the system depressurization.
Step 8.1

Remove the brake pads.

Step 8.2

Step 8.3

AutoDoc recommends:

Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
Step 9

Clean the brake caliper bracket from dirt and dust.

Step 10.1

Install new brake pads

Step 10.2

Step 10.3
Step 11

Press the piston into the cylinder to a stop.
Step 12.1

Install the brake caliper and fix it.

Step 12.2

Step 12.3
Step 13

Install the wheel.
Step 14

Lower the car and working in a cross order, tighten the wheel bolts.

AutoDoc recommends:

Slow down smoothly for first 150-200 km after the brake pads replacement. Avoid unneccessary and sharp braking to a stop.Check the brake fluid level in the expansion tank and refill if necessary.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Tips & tricks for your HONDA CR-V III (RE)

How to remove a broken bolt without welding | AUTODOC tips

260K views

Published on: 11/03/2020
Noise from under the hood | AUTODOC TIPS

198K views

Published on: 25/08/2019
How to fix a knocking and creaking suspension | AUTODOC

181K views

Published on: 08/09/2019
6 SIGNS OF A BAD FUEL FILTER | AUTODOC

163K views

Published on: 24/07/2019

How to replace the front brake pads of disc brake on Honda CR-V III

Popular maintenance tutorials for HONDA CR-V

Most commonly replaced car parts on HONDA CR-V

Manuals for HONDA models