Recommended replacement interval for the part category Brake Disc : 50000 km

All the parts you need to replace – Brake Discs for CR-V III (RE) and other HONDA models

HONDA CR-V III (RE)

AUTODOC recommends

Replace the brake disks on the car Honda CR-V III in complete set for each axis. Regardless of the state of components. This will ensure even braking.

Carry out replacement in the following order:

Step 1

Tighten the parking brake lever.

Step 2

Place wedge blocks under the rear wheels.

Step 3

Loosen wheel bolts on standing on the ground vehicle
Step 4

Raise the front of the car and secure on supports.

Step 5

Remove the front wheels.
Step 6.1

Unscrew the brake caliper fastening

Step 6.2
Step 7

Remove the brake caliper.

AutoDoc recommends:

Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Do not press the brake pedal after removing the brake pads. This will lead to the piston drop out of the brake cylinder, brake fluid leakage and the system depressurization.
Step 8.1

Unscrew the brake disc mounting bolts and remove it.

Step 8.2

AutoDoc recommends:

Clean the hub and apply high temperature grease to the seating surface of the disc.
Step 9.1

Install the new brake disc on the hub and tighten the screws.

Step 9.2
Step 10.1

Install the brake caliper and fix it.

Step 10.2

Step 10.3
Step 11

Install the wheel.
Step 12

Lower the car and working in a cross order, tighten the wheel bolts.

AutoDoc recommends:

Check the brake fluid level in the expansion tank and refill if necessary.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to replace the front brake pads of disc brake on Honda CR-V 2

Free download PDF

1.15 MB
How to replace the front brake disc on Honda CR-V 2

Free download PDF

1.1 MB
How to replace rear brake pads of disc brake on Honda CR-V 2

Free download PDF

1.04 MB
How to replace rear brake pads of disc brake on Honda CR-V III

Free download PDF

1.18 MB
How to replace the front brake pads of disc brake on Honda CR-V III

Free download PDF

1.26 MB
How to replace a front suspension ball joint on Honda CR-V III

Free download PDF

1.18 MB
How to replace the rear hub bearing on Honda CR-V III

Free download PDF

1.54 MB
How to replace the front suspension strut mount on Honda CR-V 2

Free download PDF

1.5 MB
How to replace the tie rod end on Honda CR-V III

Free download PDF

1.13 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Tips & tricks for your HONDA CR-V III (RE)

How to remove a broken bolt without welding | AUTODOC tips

260K views

Published on: 11/03/2020
Noise from under the hood | AUTODOC TIPS

198K views

Published on: 25/08/2019
How to fix a knocking and creaking suspension | AUTODOC

181K views

Published on: 08/09/2019
6 SIGNS OF A BAD FUEL FILTER | AUTODOC

163K views

Published on: 24/07/2019

How to replace the front brake disc on Honda CR-V III

Popular maintenance tutorials for HONDA CR-V

Most commonly replaced car parts on HONDA CR-V

Manuals for HONDA models