When to replace the Oil Filter on your HONDA CITY
Recommended replacement interval for the part category Oil filter : 12 month / 15000 km
Important!
This replacement procedure can be used for:
HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-VTEC (GM6), HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-VTEC (GM6) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Oil Filter for City Saloon (GM4, GM5, GM6, GM9) and other HONDA models
Tools
Replacement: engine oil and filter – HONDA CITY Saloon (GM6). List of the tools you'll need:
Wire brush
All-purpose cleaning spray
Torque wrench
Drive socket # 17
Oil filter cup socket 65/14-F
Ratchet wrench
Funnel
Oil drain pan
Fender cover
Replacement: engine oil and filter – HONDA CITY Saloon (GM6). AUTODOC recommends:
  • Replace the oil filter every time when changing motor oil.
  • Wear gloves to prevent contact with hot liquid.
  • Use only new O-rings during installation.
  • Please note: all work on the car – HONDA CITY Saloon (GM6) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Replacement: engine oil and filter – HONDA CITY Saloon (GM6). AUTODOC experts recommend:
    The vehicle must be on even keel, and if it is at an angle, the drain plug must be at the lowest point.Unscrew the oil filler plug.
    Step 2
    How to change Oil Filter on City GM6 2012 - free PDF and video manuals
    Put a waste oil container with at least 4 l capacity under the drainage hole.
  2. Step 3
    How to replace HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-VTEC (GM6) 2013 Oil Filter - step-by-step manuals and video guides
    Clean the area of the oil pan drainage hole. Use a wire brush. Use all-purpose cleaning spray.
  3. Step 4
    City GM6 1.5 i-DTEC 2014 Oil Filter replacement: free workshop manuals
    Unscrew the drain plug. Use a drive socket #17. Use a ratchet wrench.
  4. Step 5
    Changing Oil Filter on HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 Hybrid 4WD (GM5) 2015 by yourself
    Drain the used oil.
    AUTODOC recommends:
    Caution! The oil may be hot.Wait until the oil has completely drained from the drainage hole.
  5. Step 6
    How to remove HONDA CITY 1.5 (GM6) 2016 Oil Filter - online easy-to-follow instructions
    Clean the area of the oil pan drainage hole.
  6. Step 7
    How to replace Oil Filter on HONDA City Saloon (GM4, GM5, GM6, GM9) 2017: download PDF manuals and video instructions
    Screw in the new drainage plug and tighten it. Use a drive socket #17. Use a torque wrench. Tighten it to 39 nm torque.
  7. Step 8
    How hard is it to do yourself: Oil Filter replacement on City GM6 1.5 Hybrid (GM7) 2018 - download illustrated guide
    Clean the area of the oil pan drainage hole. Use all-purpose cleaning spray.
  8. Step 9
    Need to know how to renew Oil Filter on HONDA CITY 2019? This free workshop manual will help you to do it yourself
    Unscrew the oil filter. Use the 65/14-F socket. Use a ratchet wrench.
  9. Step 10
    Put the old oil filter in the container.
    Step 11
    Changing of Oil Filter on City GM6 2020 won't be an issue if you follow this illustrated step-by-step guide
    Clean the oil filter seat. Use all-purpose cleaning spray.
  10. Step 12
    HONDA CITY 1.5 i-DTEC Oil Filter replacement: online guides and video tutorials
    Screw the new filter into its place. Use the 65/14-F socket. Observe the recommended tightening torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
HONDA City Saloon (GM4, GM5, GM6, GM9) Oil Filter replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY HONDA City Saloon (GM4, GM5, GM6, GM9) Oil Filter replacement - online guide
Tips & tricks for your HONDA City Saloon (GM4, GM5, GM6, GM9)
View more
  • How to change Oil filters on HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 Hybrid (GM4) - replacement tricks
    How to restore wheel rims | AUTODOC tips
  • Changing Engine oil filter City GM6 1.5 i-VTEC (GM6) - Replacement Tips
    Top 5 brake repair mistakes | AUTODOC tips
  • Maintenance Hacks - HONDA City Saloon (GM4, GM5, GM6, GM9) 1.5 i-DTEC Oil filters replacement guide
    5 car interior cleaning mistakes | AUTODOC tips
  • Replace Engine oil filter on City GM6 - free video tips
    What to do if your check engine light is on | AUTODOC tips