Disclaimer
How to change front ball joint on RENAULT Scénic I (JA0/1, FA0) – replacement guide
downloads:
8
Views:
151
Important!
This replacement procedure can be used for:
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A), RENAULT Scénic I (JA0/1_, FA0_) 1.6, RENAULT Scénic I (JA0/1_, FA0_) 1.9 D (JA0J, FA0J), RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel, RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel (JA04), RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00, JA16, JA15, JA19, JA1V, JA2B, JA2C, JA0B,... … View more
The steps may slightly vary depending on the car design.
RENAULT Scénic I (JA0/1_, FA0_) 1.4 16V (JA0D, JA1H, Ja0W, JA10), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1D, JA17), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA0N), RENAULT Scénic I (JA0/1_, FA0_) 2.0 16V (JA1B, JA1D, JA0C), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dCi (JA05, JA1F), RENAULT Scénic I (JA0/1_, FA0_) 1.9 dTi (JA1U), RENAULT Scénic I (JA0/1_, FA0_) 1.8 16V (JA12, JA1R, JA1M, JA1A), RENAULT Scénic I (JA0/1_, FA0_) 1.6, RENAULT Scénic I (JA0/1_, FA0_) 1.9 D (JA0J, FA0J), RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel, RENAULT Scénic I (JA0/1_, FA0_) 1.6 BiFuel (JA04), RENAULT Scénic I (JA0/1_, FA0_) 1.6 (JA00, JA16, JA15, JA19, JA1V, JA2B, JA2C, JA0B,... … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Suspension Ball Joint for Scénic I (JA0/1_, FA0_) and other RENAULT models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #18
Drive socket # 16
Drive socket # 18
Wheel impact socket #19
Ratchet wrench
Flat chisel
Crow bar
Hammer
Wheel chock
Replacement: ball joint – RENAULT SCÉNIC I (JA0/1_). AUTODOC experts recommend:
- The replacement procedure is identical for the left and right ball joints.
- Please note: all work on the car – RENAULT SCÉNIC I (JA0/1_) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the car.Replacement: ball joint – RENAULT SCÉNIC I (JA0/1_). Tip from AUTODOC experts:If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. RENAULT SCÉNIC I (JA0/1_) - Step 5
Remove the wheel. - Step 6
Clean the fastener connecting the ball joint to the steering knuckle. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the ball joint fastening to the steering knuckle. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench. - Step 8
Unscrew the caliper bracket fastening. Use a drive socket #18. Use a ratchet wrench. - Step 9
Remove the fastening bolt. - Step 10
Clean the fasteners connecting the ball joint to the suspension control arm. Use a wire brush. Use WD-40 spray. - Step 11
Unscrew the fastener connecting the ball joint to the suspension control arm. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 12
Release the fastener connecting the ball joint to the steering knuckle. Use a crowbar. - Step 13
Disconnect the ball joint from the control arm. - Step 14
Disconnect the ball joint from the steering knuckle. Use a flat metal-working chisel. Use a hammer. - Step 15Clean the ball joint mounting seat. Use a wire brush.Step 16Install a new ball joint.Replacement: ball joint – RENAULT SCÉNIC I (JA0/1_). AUTODOC experts recommend:Do not damage the ball joint cover.Step 17
Treat the fasteners of the ball joint. Use copper grease. - Step 18
Connect the ball joint to the steering knuckle. - Step 19
Attach the ball joint to the control arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Scénic I (JA0/1, FA0) model
Popular maintenance tutorials for Renault Scenic 1
Complete guides for changing the Suspension ball joint on different RENAULT SCÉNIC models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Scénic I (JA0/1_, FA0_)
View more
How to align the timing marks correctly on an EA888 engine
Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
The most common problems when buying a used car | AUTODOC
What to do if the ABS light comes on: DIY Diagnostics Tips
Most commonly replaced car parts on RENAULT SCÉNIC
Time to replace parts? Get even better deals in our Shop app.

SCAN ME
































